BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00278929BTC
במלאי
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX TK-3252 memory upgrade
16 GB DDR4 SODIMM running at 3200 MHz CL22, built for the POSIFLEX TK-3252 kiosk
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Designed for POSIFLEX TK-3252 kiosks ensuring drop-in compatibility
- 16 GB DDR4 3200 CL22 boosts multitasking headroom in retail terminals
- 2Rx8 organisation with major OEM chips delivers stable throughput under load
- 2 V DDR4 SODIMM cuts heat in fanless enclosures
- 260-pin non-ECC unbuffered module installs in minutes without tools
POSIFLEX TK-3252 memory upgrade
This 16GB DDR4 3200 SODIMM is built for the POSIFLEX TK-3252 kiosk. The 260-pin module installs in minutes and targets integrators who maintain point-of-sale fleets. CL22 latency and 1.2V operation match the original specification.
Thermals noise and power
The unbuffered design runs at 1.2V without a heat spreader. Passive cooling handles the thermal load in typical kiosk enclosures. No fan is required and the module adds negligible acoustic output. Power draw stays within standard DDR4 limits.
Build quality and connectors
Major OEM Samsung Micron Hynix chips are stress tested under load for system stability. The 2Rx8 rank layout fits the single SODIMM slot on the TK-3252 board. Non-ECC unbuffered signalling matches the platform chipset. The 260-pin edge connector ensures a secure seat in vertical or horizontal mounts.
נקודות עיקריות
- Designed for POSIFLEX TK-3252 kiosks ensuring drop-in compatibility
- 16 GB DDR4 3200 CL22 boosts multitasking headroom in retail terminals
- 2Rx8 organisation with major OEM chips delivers stable throughput under load
- 2 V DDR4 SODIMM cuts heat in fanless enclosures
- 260-pin non-ECC unbuffered module installs in minutes without tools
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
שאלות על הפריט הזה
How do I install the 260-pin SODIMM into the POSIFLEX TK-3252 and what step is often missed?
Power off the kiosk, open the memory compartment, align the notch on the 260-pin SODIMM with the slot key, press firmly until the side clips click, then verify 16GB appears in BIOS before reassembling.
What maintenance or replacement will this 16GB DDR4 module need later?
No scheduled maintenance is required; the module has no heat spreader and uses standard 1.2V DDR4 chips, so replacement is only necessary if a memory error appears or capacity must be increased.
What limit appears first when the POSIFLEX TK-3252 runs sustained workloads with this CL22 memory?
The CAS latency of CL22 at 3200MHz sets the access timing ceiling, so sustained throughput is bounded by the 22-cycle delay before each column read can begin.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
