BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00279596BTC
במלאי
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 260-pin SODIMM kit for POSIFLEX XT-3915IR-G2 JIVA Foldable 15 Terminal
A 32 GB DDR4 SODIMM kit running at 3200 MT/s with CL22 timing, built for the POSIFLEX XT-3915IR-G2 JIVA Foldable 15 Terminal
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity in a dual-channel 2×16 GB kit
- DDR4 3200 speed rated at PC4-25600 bandwidth
- Low 1.20 V voltage reduces power draw
- CL22 latency for responsive POS operation
- 260-pin SODIMM form factor fits the XT-3915IR-G2 terminal
System-specific DDR4 SODIMM kit
This 32 GB kit contains two 16 GB DDR4 3200 SODIMM modules built for the POSIFLEX XT-3915IR-G2 JIVA Foldable 15 terminal. The modules run at 1.20 V with CL22 latency and use a 260-pin unbuffered non-ECC design. They are intended for point-of-sale and kiosk systems that require this exact memory configuration.
Straightforward SODIMM installation
The modules slot into the terminal's 260-pin DDR4 sockets without tools or firmware changes. Because the kit is validated for the named POSIFLEX model, the BIOS recognises the 2Rx8 organisation automatically. The only common issue is attempting to mix these sticks with existing memory of a different speed, voltage or rank, which can prevent the system from posting.
Suits POSIFLEX XT-3915IR-G2 upgrades
This kit fits technicians refreshing the JIVA Foldable 15 terminal to its maximum supported capacity. It is not for buyers who need ECC error correction, registered buffering, a different pin count or a voltage other than 1.20 V. Builders working on laptops, desktops or other POS hardware should verify their platform's exact SODIMM specification before ordering.
נקודות עיקריות
- 32 GB capacity in a dual-channel 2×16 GB kit
- DDR4 3200 speed rated at PC4-25600 bandwidth
- Low 1.20 V voltage reduces power draw
- CL22 latency for responsive POS operation
- 260-pin SODIMM form factor fits the XT-3915IR-G2 terminal
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
שאלות על הפריט הזה
How do I verify the kit runs at 3200 CL22 after installing it in the POSIFLEX XT-3915IR-G2?
Enter the system BIOS or UEFI and confirm the memory frequency shows 3200 MT/s and the CAS latency reads CL22; the modules operate at 1.20 V and are 2Rx8 rank, so those values should appear without further adjustment.
What does the MS25600-628K2 package contain and is anything else required for the terminal?
The box includes two 16 GB DDR4 3200 SODIMM modules (260-pin, non-ECC, unbuffered, 1.20 V, CL22); no additional parts or cables are needed for the POSIFLEX JIVA Foldable 15 terminal.
Why choose the 32 GB (2x16 GB) kit instead of a single 16 GB module for this POSIFLEX system?
The dual-channel 2x16 GB configuration doubles bandwidth over a single stick, uses both SODIMM slots, and matches the 3200 CL22 spec validated for the XT-3915IR-G2, giving smoother multitasking in point-of-sale workloads.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
