SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.00501664BTC
במלאי
NEMIX RAM
NEMIX RAM 384GB 8x48GB DDR5 6400MHz ECC RDIMM memory upgrade for Supermicro H13SSL-N
Eight 48 GB DDR5 6400 MHz Registered ECC RDIMMs totalling 384 GB, matched to the Supermicro H13SSL-N memory controller at 1.1 V CL52
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from eight 48 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors automatically
- 288-pin RDIMM form factor matches Supermicro H13SSL-N slots
- Built with Samsung, Micron or Hynix chips for enterprise reliability
384GB DDR5 6400 ECC RDIMM Kit
This NEMIX RAM kit provides 384GB of memory across eight 48GB modules. It uses DDR5 6400 (PC5-51200) Registered ECC RDIMMs with CL52 latency and 1.1V operation. The 2Rx8 rank configuration and 288-pin form factor match the Supermicro H13SSL-N motherboard requirements. The modules are built with major OEM chips from Samsung, Micron or Hynix.
Suited for Supermicro H13SSL-N Servers
This kit suits administrators upgrading a Supermicro H13SSL-N motherboard to its full eight-slot capacity with Registered ECC memory. It is not for systems that require UDIMM or SODIMM form factors. It is not for platforms that cannot accept 2Rx8 Registered DIMMs at DDR5 6400 speeds. Builders needing non-ECC or unbuffered memory should look elsewhere.
Eight-Module 2Rx8 Population Rule
The single specification that decides fitment is the eight-module 2Rx8 Registered population. The H13SSL-N must support eight 48GB 2Rx8 RDIMMs at DDR5 6400 with 1.1V CL52 timing for this kit to operate at rated capacity and speed. Verify the motherboard manual for approved DIMM population order and maximum supported capacity per slot before purchase.
נקודות עיקריות
- 384 GB total capacity from eight 48 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors automatically
- 288-pin RDIMM form factor matches Supermicro H13SSL-N slots
- Built with Samsung, Micron or Hynix chips for enterprise reliability
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
שאלות על הפריט הזה
Is the 384GB kit the right capacity for my Supermicro H13SSL-N, or should I choose a different kit?
This 384GB kit provides eight 48GB modules, filling all available slots on the Supermicro H13SSL-N. Check your motherboard manual for the approved population order and maximum supported capacity per DIMM before ordering.
Will the DDR5 6400 speed run at its rated 6400MHz once installed in the server?
The modules are spec-matched to the board's memory controller with the exact rank, voltage and timing it expects, so the system recognises the full 384GB and operates at the rated DDR5 6400 speed.
Does the 288-pin RDIMM form factor and registered ECC design work with the H13SSL-N memory controller?
Yes. The kit uses 288-pin DDR5 RDIMM modules with registered (buffered) architecture and ECC, which is the form factor and error-correction type the H13SSL-N requires for full-capacity, stable operation.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
