SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.00500262BTC
במלאי
NEMIX RAM
NEMIX RAM 64GB DDR4 2933 ECC RDIMM 2Rx4 CL21 1.2V 288-pin Dell PowerEdge R740 memory upgrade
A 64 GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2 V operation for Dell PowerEdge R740 servers
- Capacity64GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB capacity supports heavy virtualization workloads
- DDR4 2933 speed matches Dell PowerEdge R740 specifications
- ECC registered design protects data integrity in servers
- 2 V operation reduces power draw per module
- 288-pin RDIMM form factor fits standard server slots
64 GB DDR4 2933 ECC RDIMM for Dell PowerEdge R740
This single 64 GB registered DIMM uses DDR4 2933 memory with ECC and a 2Rx4 organisation. It is built for the Dell PowerEdge R740 rack server and similar enterprise systems that require registered error-correcting modules. The 1.2 V operating voltage matches standard DDR4 server specifications.
Sustained load behaviour with CL21 registered timing
The module runs at PC4-23400 speed with a CAS latency of 21 cycles. Registered buffering reduces electrical load on the memory controller, helping stability during continuous workloads such as virtualisation, database hosting or large-scale analytics. Major OEM chips from Samsung, Micron or Hynix are screened under stress to maintain data integrity over long periods.
Verify slot count and population rules before
Confirm the R740 has free 288-pin DDR4 RDIMM slots and check the server’s memory population guide for rank and capacity limits per channel. The 2Rx4 dual-rank design may affect maximum supported modules per processor. Ensure the BIOS is current to recognise the full 64 GB capacity.
נקודות עיקריות
- 64 GB capacity supports heavy virtualization workloads
- DDR4 2933 speed matches Dell PowerEdge R740 specifications
- ECC registered design protects data integrity in servers
- 2 V operation reduces power draw per module
- 288-pin RDIMM form factor fits standard server slots
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2933MHZ RDIMM Registered Server Memory |
| Part Number | MR23400-924K1 |
| Capacity | 64GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory |
שאלות על הפריט הזה
How much power does the 1.2 V DDR4 2933 module draw when the Dell PowerEdge R740 runs continuously?
The registered ECC DIMM operates at 1.2 V, so power draw stays at the standard DDR4 level for a 64 GB 2Rx4 module under sustained server workloads.
What server component must already be present for this RDIMM to function?
A Dell PowerEdge R740 with an available 288-pin DDR4 RDIMM slot and a processor that supports registered ECC memory.
Will this 2Rx4 CL21 stick work alongside older 1Rx4 or 2Rx8 modules already installed in the R740?
Mixing ranks is supported by the R740 memory controller, but population rules require matching speed and voltage; the system will clock all modules to the lowest common timing.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
