אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green circuit board SODIMM module with black memory chips, gold edge connector, 204 pins

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7412

SKU CH-QJQ0-Z24NV

8GB DDR3 1333 SODIMM for POSIFLEX KS-7412 terminal, 1.35V low voltage, CL9 latency

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches system bus for stable operation
  • 35 V low-voltage design reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX KS-7412 slot directly
  • 2Rx8 dual-rank organisation optimises memory controller efficiency

POSIFLEX KS-7412 targeted upgrade

This SODIMM is built specifically for the POSIFLEX KS-7412 compact fanless point-of-sale terminal. It provides 8GB of DDR3 memory in a single 204-pin module that matches the system's original specification. The part is intended for technicians maintaining or expanding these kiosk platforms.

Steady operation under continuous duty

The module runs at 1333 MT/s with CL9 latency and operates at 1.50V, delivering consistent throughput during long transaction cycles. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under load to sustain stability in always-on retail environments. Unbuffered non-ECC organisation keeps latency low for the terminal's embedded workload.

Direct-fit 204-pin form factor

The stick uses a standard 204-pin DDR3 SODIMM edge connector with no heat spreader, allowing it to slide into the KS-7412's tight internal slot without clearance issues. Rank is 2Rx8, matching the platform's memory controller expectations. Installation follows the terminal's service manual and requires no additional cabling or brackets.

נקודות עיקריות

  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches system bus for stable operation
  • 35 V low-voltage design reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX KS-7412 slot directly
  • 2Rx8 dual-rank organisation optimises memory controller efficiency

מפרט טכני

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

שאלות על הפריט הזה

Does the 1.35 V rating keep heat and power draw low during continuous POS terminal operation?

The module runs at 1.35 V, reducing power consumption and thermal output compared to standard 1.50 V DDR3, which helps the fanless KS-7412 stay cool during all-day use.

What must the POSIFLEX KS-7412 already have for this 204-pin SODIMM to install and function?

The terminal needs a free DDR3 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 1333 MHz; no additional hardware or adapters are required.

Will this 8 GB DDR3 1333 stick work alongside the original 4 GB module already in my KS-7412?

Yes, it is compatible with the KS-7412 and will run in dual-channel mode if the existing module is also DDR3 1333 CL9 unbuffered non-ECC, otherwise the system will operate at the slower module's speed.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.