אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX HC-1521P memory upgrade

SKU CH-TRSB-2RTWF

8GB DDR3 1333MHz SODIMM module validated for POSIFLEX HC-1521P terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity extends multitasking headroom on POSIFLEX HC-1521P terminals
  • DDR3 1333MHz speed matches PC3-10600 system bus for stable throughput
  • 35V low-voltage operation reduces power draw in kiosk deployments
  • 204-pin SODIMM form factor fits factory memory slot without adapters
  • Rigorous stress testing under load ensures reliability in continuous-use environments

System-specific SODIMM for POSIFLEX HC-1521P

This 8 GB DDR3 1333 MHz module uses the 204-pin SODIMM form factor and runs at 1.35 V. It is built as a 2Rx8 non-ECC unbuffered stick specifically validated for the POSIFLEX HC-1521P high-end touch-screen infotainment terminal.

Suits technicians upgrading that terminal.

The part is qualified only for the POSIFLEX HC-1521P, so it fits technicians servicing that exact terminal. It will not work in systems needing ECC, registered DIMMs, a different voltage, a different pin count, DDR5 or any other memory generation.

Deciding spec: 204-pin DDR3 SODIMM at 1333 MHz

The single specification that decides compatibility is the 204-pin DDR3 SODIMM interface running at 1333 MHz (PC3-10600) with 1.35 V operation and 2Rx8 organisation. Match those details to the terminal's service manual before ordering.

נקודות עיקריות

  • 8GB capacity extends multitasking headroom on POSIFLEX HC-1521P terminals
  • DDR3 1333MHz speed matches PC3-10600 system bus for stable throughput
  • 35V low-voltage operation reduces power draw in kiosk deployments
  • 204-pin SODIMM form factor fits factory memory slot without adapters
  • Rigorous stress testing under load ensures reliability in continuous-use environments

מפרט טכני

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

שאלות על הפריט הזה

How can I verify the module is running at 1333MHz with CL9 after installing it in the POSIFLEX HC-1521P?

Enter the system BIOS or use a utility like CPU-Z to confirm the memory frequency reads 1333MHz and the CAS latency shows CL9 for the installed SODIMM.

What comes in the package and is anything else required for the upgrade?

The box contains one 8GB 204-Pin DDR3 SODIMM; no extra parts or tools are needed beyond the terminal's own memory slot access.

Which specification should I match when choosing this memory for the POSIFLEX HC-1521P?

Select the 8GB DDR3 1333MHz PC3-10600 2Rx8 1.35V 204-Pin Non-ECC Unbuffered SODIMM with part number MS10600-828K1 to match the terminal's requirements.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.