אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green bare circuit board DDR4 RDIMM module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 ECC RDIMM CL15 1.2V 1Rx4 memory upgrade

SKU CH-ZWKG-1PR0A

8GB DDR4 2133MHz ECC registered DIMM with CL15 latency and 1.2V operation for compatible servers

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands server memory for heavier workloads
  • DDR4 2133 speed delivers PC4-17000 bandwidth for data-intensive tasks
  • ECC registered design corrects errors to protect mission-critical data
  • 2 V operation reduces power draw in dense configurations
  • CL15 latency at 1Rx4 rank optimises throughput for compatible Hynix systems

NEMIX 8 GB DDR4 ECC RDIMM for Servers

This NEMIX RAM module delivers 8 GB of DDR4-2133 registered ECC memory built for server and workstation platforms. It operates at 1.2 V with a CL15 latency and a 1Rx4 organisation. The 288-pin RDIMM form factor fits registered DIMM slots on compatible motherboards.

Registered ECC design improves data integrity

The registered buffer reduces electrical load on the memory controller, allowing stable operation in multi-DIMM configurations. On-die ECC detects and corrects single-bit errors, protecting critical workloads from silent data corruption. No heat spreader is included, so airflow across the module is unhindered.

Verify registered DIMM support and voltage

Confirm that your motherboard accepts DDR4 registered ECC RDIMMs and runs at 1.2 V before ordering. Systems requiring unbuffered UDIMMs or a different voltage will not boot with this module. Check the qualified-vendor list for the exact part number MR17000-814K1.

נקודות עיקריות

  • 8 GB capacity expands server memory for heavier workloads
  • DDR4 2133 speed delivers PC4-17000 bandwidth for data-intensive tasks
  • ECC registered design corrects errors to protect mission-critical data
  • 2 V operation reduces power draw in dense configurations
  • CL15 latency at 1Rx4 rank optimises throughput for compatible Hynix systems

מפרט טכני

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC RDIMM Registered Server Memory
Part NumberMR17000-814K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory

שאלות על הפריט הזה

Will the 1Rx4 registered ECC module need replacement if a rank fails?

The 1Rx4 organisation means the entire 8 GB capacity sits on a single rank; ECC can correct single-bit errors but a rank-level fault would require replacing the module.

Which electrical or thermal limit appears first under continuous server workloads?

The module runs at 1.2 V with CL15 latency and no heat spreader, so the voltage and timing envelope is the first boundary reached during sustained operation.

How much fan airflow is needed to keep the 288-pin RDIMM cool when it runs all day?

With no heat spreader and a 1.2 V operating voltage, standard server chassis airflow directed across the DIMM slots is normally sufficient for continuous duty.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.