אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2933MHz CL21 1Rx8 1.2V 260-pin SODIMM memory upgrade

SKU CH-4Y61-609TV

An 8 GB DDR4 SODIMM running at 2933 MHz with CL21 latency and 1.2 V, verified for Supermicro X12SCV motherboards

  • Capacity8GB
  • Type260-Pin DDR4 SODIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 8GB

  • Exact-match DDR4-2933 CL21 1.2 V module recognised at full rated speed
  • Verified fit for Supermicro X12SCV-W and X12SCV-LVDS motherboards with 260-pin SODIMM slot
  • Built from major OEM Samsung, Micron or Hynix chips tested at rated timing and voltage
  • 1Rx8 Non-ECC unbuffered rank matches the system's memory-population rules
  • Lifetime replacement warranty with free US-based technical support included

Exact-match DDR4-2933 SODIMM for Supermicro X12SCV

This 8GB DDR4 SODIMM runs at 2933MHz with CL21 timing and 1.20V voltage. The 1Rx8 rank configuration matches the memory controller expectations of Supermicro X12SCV-W and X12SCV-LVDS motherboards. It uses major OEM chips from Samsung Micron or Hynix and is built as a non-ECC unbuffered module.

Sustained-load stability with OEM-grade chips

The module is tested for stability at its rated 2933MHz speed and CL21 latency under continuous operation. Major OEM DRAM components maintain signal integrity during extended workloads without thermal throttling. The 1.20V operating voltage keeps power draw consistent across long sessions.

Verify your Supermicro manual before ordering

Check the system documentation for supported memory capacities and approved population order for the X12SCV series. Confirm the board requires 260-pin SODIMM form factor and not desktop UDIMM. Ensure your specific model accepts non-ECC unbuffered DDR4-2933 modules.

נקודות עיקריות

  • Exact-match DDR4-2933 CL21 1.2 V module recognised at full rated speed
  • Verified fit for Supermicro X12SCV-W and X12SCV-LVDS motherboards with 260-pin SODIMM slot
  • Built from major OEM Samsung, Micron or Hynix chips tested at rated timing and voltage
  • 1Rx8 Non-ECC unbuffered rank matches the system's memory-population rules
  • Lifetime replacement warranty with free US-based technical support included

מפרט טכני

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered SODIMM Memory
Part NumberMS23400-818K1
Capacity8GB
Type260-Pin DDR4 SODIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 260-PIN Non-ECC SODIMM KIT

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

Does the 1.2V DDR4 SODIMM run hot or draw much power during continuous use?

At 1.2V and CL21 the module stays within standard DDR4 power limits and has no heat spreader, so it runs cool in a laptop chassis.

What must my Supermicro board already have to accept this 260-pin module?

Your X12SCV-W or X12SCV-LVDS motherboard needs a free DDR4 SODIMM slot that supports 2933 MT/s PC4-23400 unbuffered non-ECC memory.

Will this 1Rx8 stick work alongside older DDR4 modules I keep installed?

Yes, provided the existing sticks are also DDR4 2933 PC4-23400 non-ECC unbuffered SODIMMs; mixed ranks or speeds will force the system to the lowest common setting.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.