BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00276571BTC
במלאי
NEMIX RAM
NEMIX RAM DDR5 32GB (2x16GB) 5600MHz CL46 1.1V 288-Pin UDIMM Dell Pro Max Tower T2
32 GB dual-channel DDR5 kit at 5600 MHz with CL46 timing and 1.1 V operation for Dell Pro Max Tower T2
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB dual-channel kit doubles memory bandwidth for Dell Pro Max Tower T2
- DDR5 5600 MT/s speed raises data throughput for demanding workloads
- Low 1.10 V operation reduces power draw and heat output
- CL46 latency keeps response times tight during multitasking
- 288-pin UDIMM form factor fits straight into the desktop memory slots
Dell Pro Max Tower T2 memory kit
This 32 GB kit contains two 16 GB DDR5 UDIMM modules built for the Dell Pro Max Tower T2 desktop. Each module runs at 5600 MHz with a CL46 latency at 1.1 V. The unbuffered non-ECC design suits standard desktop workloads.
Verify DDR5 UDIMM support
Confirm the motherboard accepts 288-pin DDR5 UDIMM memory and can operate at the 5600 MHz data rate. Check that the system BIOS recognises 1Rx8 modules at 1.1 V without requiring registered or ECC memory.
Two-slot population
The dual-module kit fills two DIMM slots, leaving any remaining slots free for future expansion. No heat spreader is fitted, so clearance around adjacent components is maximised. Installation follows the standard UDIMM insertion procedure.
נקודות עיקריות
- 32 GB dual-channel kit doubles memory bandwidth for Dell Pro Max Tower T2
- DDR5 5600 MT/s speed raises data throughput for demanding workloads
- Low 1.10 V operation reduces power draw and heat output
- CL46 latency keeps response times tight during multitasking
- 288-pin UDIMM form factor fits straight into the desktop memory slots
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
שאלות על הפריט הזה
Does the kit contain two 16 GB modules or do I need to buy a second stick separately?
The kit includes two 16 GB DDR5 UDIMM modules for a total of 32 GB, so no additional sticks are required.
Should I choose the CL46 5600 MHz version or look for a lower-latency alternative?
This kit is specified at CL46 and 5600 MHz; select it when your Dell Pro Max Tower T2 calls for those exact timings.
What does the 5600 MHz rating mean once the memory is installed in the Dell Pro Max Tower T2?
The modules will run at 5600 MHz DDR5 speed with CL46 latency at 1.10 V, matching the system's supported memory profile.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
