NEMIX RAM DDR5 6400 128GB 2x64GB CL52 1.1V ECC Registered RDIMM memory upgrade

GIGABYTE MS04-CE0 DDR5 RDIMM kit

This 128GB kit contains two 64GB DDR5 6400 Registered ECC RDIMMs built to the exact rank, voltage and timing the GIGABYTE MS04-CE0 motherboard expects. The modules run at 1.1V with CL52 latency and use a 2Rx4 organisation so the memory controller recognises the full capacity at rated speed. Each stick is a 288-pin RDIMM using major OEM chips from Samsung, Micron or Hynix and has no heat spreader.

Suited for populated server builds.

The registered architecture offloads the memory controller, allowing every slot to run fully populated at full capacity while ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. This kit is validated for the GIGABYTE MS04-CE0 and will not fit systems that require UDIMM or SODIMM modules. Builders needing non-ECC memory, lower capacities, different speeds or consumer form factors should look elsewhere.

Registered ECC with 2Rx4 organisation

The single specification that decides fitment is the 2Rx4 Registered ECC RDIMM organisation combined with DDR5 6400 at 1.1V and CL52. Your motherboard manual must confirm support for this exact rank, voltage, timing and registered buffer type before purchase. If the platform expects UDIMM, different rank structure, other voltage or another speed grade, the modules will not be recognised or will run at reduced capability.