BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00278531BTC
במלאי
NEMIX RAM
NEMIX RAM MR44800-4828K1 48GB DDR5 5600 ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade
48GB DDR5 5600 ECC registered RDIMM validated for Supermicro H13DSG-O-CPU motherboards
- Capacity48GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Exact-match 48GB DDR5-5600 module installs at full rated speed
- Registered ECC architecture prevents silent data corruption under load
- 2Rx8 rank and 1.1V voltage match Supermicro H13DSG-O-CPU requirements
- 288-pin RDIMM form factor fits the board's memory slots precisely
- Lifetime replacement warranty with US-based technical support included
Exact-match upgrade for Supermicro H13DSG-O-CPU
This NEMIX RAM module delivers 48GB of DDR5 5600 ECC registered memory built to the Supermicro H13DSG-O-CPU motherboard's exact specifications. It operates at 1.1V with CL46 latency in a 288-pin RDIMM form factor using 2Rx8 organization. The registered design offloads the memory controller for stable full-population operation.
Replaces slower or smaller DDR5 RDIMMs
The jump is worth it when your current configuration runs below 5600 MT/s or uses lower-capacity registered DIMMs that limit total system memory. This kit matches the board's required voltage, rank structure, and timing so the controller recognizes full capacity at rated speed without manual tuning. ECC corrects single-bit errors on the fly to prevent silent data corruption.
Suits administrators expanding Supermicro
Builders who need unregistered UDIMMs, SODIMM form factors, or non-ECC memory should look elsewhere. Systems requiring different voltage, latency, or rank configurations than 1.1V CL46 2Rx8 will not be compatible. Always verify your motherboard manual for approved population rules and maximum supported capacity per slot before installation.
נקודות עיקריות
- Exact-match 48GB DDR5-5600 module installs at full rated speed
- Registered ECC architecture prevents silent data corruption under load
- 2Rx8 rank and 1.1V voltage match Supermicro H13DSG-O-CPU requirements
- 288-pin RDIMM form factor fits the board's memory slots precisely
- Lifetime replacement warranty with US-based technical support included
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K1 |
| Capacity | 48GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
שאלות על הפריט הזה
Does the 288-pin RDIMM fit the Supermicro H13DSG-O-CPU motherboard slots?
Yes, the 288-pin Registered RDIMM form factor matches the slots on the Supermicro H13DSG-O-CPU motherboard.
What is the correct installation step for the 2Rx8 registered ECC modules?
Follow the motherboard manual for the approved DIMM population order so the 2Rx8 registered ECC modules are recognised at full capacity.
When should the 48GB DDR5 5600 ECC RDIMM be replaced?
Replace the module if ECC logs report uncorrectable errors or the system experiences unexplained reboots during operation.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
