אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 60mm square fan, 25mm thick, two-wire connector

OEM Industries

OEM Industries D60SH-12C 60mm 25mm 2-pin fan CPU cooler

SKU CH-Y1TM-8KV1P

60 mm sleeve-bearing fan runs on 12 V at 0.18 A with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDNo
  • Original GP D60SH-12C cooler for reliable operation
  • DC 12 V 0.18 A rating for efficient power draw
  • 60 mm fan with sleeve bearing for quiet running
  • 25 mm thickness fits standard 6025 mounting points
  • Two-wire two-pin connector for simple installation

Compact 60 mm sleeve-bearing fan

The OEM Industries D60SH-12C is a 60 mm by 25 mm axial fan with a sleeve bearing and a two-wire power connector. It runs on 12 V at 0.18 A and has no LED lighting. The unit is sold as a fan only, without a heatsink or mounting hardware for a specific socket.

Replaces a worn or noisy 6025 cooler

This fan fits the same 6025 footprint as many stock CPU coolers, router chassis fans and small UPS enclosures. The jump is worth it when the original sleeve-bearing unit has become loud, developed wobble or stopped spinning altogether. It is not a PWM-controlled model, so speed cannot be regulated by the motherboard.

Fits tight 60 mm mounts with two-pin power

The 60 mm frame and two-pin connector allow direct installation in any 6025 cut-out that supplies 12 V on a two-wire header. No additional brackets or adapters are included, so the surrounding build must already provide the correct mounting holes and clearance. It frees up the larger cooler slots for other components.

נקודות עיקריות

  • Original GP D60SH-12C cooler for reliable operation
  • DC 12 V 0.18 A rating for efficient power draw
  • 60 mm fan with sleeve bearing for quiet running
  • 25 mm thickness fits standard 6025 mounting points
  • Two-wire two-pin connector for simple installation

מפרט טכני

ModelD60SH-12C
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDNo

שאלות על הפריט הזה

Will the 60 mm by 25 mm frame fit my CPU cooler bracket?

The fan measures 60 mm square and 25 mm thick, matching the standard 6025 mounting pattern used on many low-profile CPU coolers.

How do I connect the two-wire lead to a motherboard header?

Plug the 2-pin connector onto a 12 V DC fan header; the sleeve-bearing motor draws 0.18 A, so ensure the header can supply at least that current.

When should I plan to replace the sleeve-bearing fan?

Sleeve bearings typically last several years of continuous use; replace the unit once noise increases or RPM drops noticeably.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.