אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר

OEM Industries

OEM Industries F3828B12HB 38mm 12V 0.3A Ball Bearing CPU cooler

SKU CH-FR47-W5KE5 MPN F3828B12HB

A 38 mm ball-bearing fan runs at 12 V and .3 A for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size38mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 38 mm fan fits compact CPU coolers
  • Ball bearing ensures long-term reliability
  • 12 V 0.3 A draws minimal power
  • Three-pin connector enables speed monitoring
  • 28 mm thickness suits low-profile builds

Compact 38 mm Ball-Bearing Fan

The OEM Industries F3828B12HB is a 38 mm square axial fan with a 28 mm frame depth. It runs on 12 V DC at 0.3 A and uses a three-pin power connector. The ball-bearing design suits continuous operation in tight chassis locations.

Suits Space-Constrained Cooling Slots

This fan fits 38 mm mounting holes where larger coolers cannot be installed. Builders needing higher airflow, PWM speed control or integrated LED lighting should look at other models.

Check Mounting Pattern and Header Type

Verify that your board or device provides a three-pin 12 V header and the standard 32 mm hole spacing. The fan has no PWM wire, so speed control depends on voltage regulation from the header.

נקודות עיקריות

  • 38 mm fan fits compact CPU coolers
  • Ball bearing ensures long-term reliability
  • 12 V 0.3 A draws minimal power
  • Three-pin connector enables speed monitoring
  • 28 mm thickness suits low-profile builds

מפרט טכני

ModelF3828B12HB
ColorBlack
TypeFan only
Fan Size38mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

שאלות על הפריט הזה

What power connector does the 38 mm F3828B12HB fan use?

It connects via a standard 3-pin header, so the motherboard or fan controller must provide a matching 3-pin socket.

Can the 12 V 0.3 A ball-bearing fan replace a noisier sleeve-bearing unit of the same 38 mm frame?

Yes, the ball bearing design fits the identical 38 mm mounting pattern and draws the same 12 V 0.3 A, offering longer life and consistent speed.

How can I verify the F3828B12HB is spinning correctly after installation?

Check the BIOS or monitoring software for a stable RPM reading on the 3-pin header; the fan should report speed without PWM control.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.