Tripp Lite
Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
328.99 $
0.00422015BTC
במלאי
OEM Industries
OEM Industries SCBD12X4S-304 120mm 32mm 3 Pin centrifugal cooler
A 120 mm centrifugal blower with a 32 mm frame, 3-pin connector and ball bearing for directed case airflow
- Color2-Tone
- TypeFan only
- Fan Size120mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 120 mm centrifugal blower directs focused airflow into tight chassis spaces
- 32 mm thick frame fits standard 120 mm mounting points without modification
- Ball-bearing motor rated for continuous 12 V operation at .2 A
- Low 2.4 W power draw keeps system thermal budget minimal
- 3-pin connector enables direct motherboard speed monitoring and control
Centrifugal Blower for Tight Chassis
The OEM Industries SCBD12X4S-304 is a 120 mm centrifugal blower designed for cases where a conventional axial fan cannot exhaust heat directly. Its 32 mm thick frame houses a 12 V, 0.2 A motor rated at 2.4 W, making it suitable for compact industrial enclosures or small-form-factor PCs that need focused airflow through restricted vents.
Steady Airflow Through Restrictions
Because the impeller pushes air outward across a 12032 profile, the blower maintains pressure when ducts, filters or dense heatsink fins resist flow. Ball bearings support continuous duty at the rated 12 V input, so the 3-pin connector delivers consistent speed without the voltage sag that can stall weaker axial fans in the same space.
Verify Mounting And Power Before Ordering
Confirm your chassis has 120 mm mounting points spaced for a 32 mm deep housing and that the 3-pin header on your board or controller supplies 12 V. The two-tone finish is cosmetic only; the unit includes no LEDs or PWM control, so speed will vary with voltage rather than a fourth wire signal.
נקודות עיקריות
- 120 mm centrifugal blower directs focused airflow into tight chassis spaces
- 32 mm thick frame fits standard 120 mm mounting points without modification
- Ball-bearing motor rated for continuous 12 V operation at .2 A
- Low 2.4 W power draw keeps system thermal budget minimal
- 3-pin connector enables direct motherboard speed monitoring and control
מפרט טכני
| Model | SCBD12X4S-304 |
|---|---|
| Color | 2-Tone |
| Type | Fan only |
| Fan Size | 120mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
שאלות על הפריט הזה
How much power does the 120mm centrifugal cooler draw when running continuously?
The blower is rated at 12 V, 0.2 A and 2.4 W, so continuous operation stays within that low power envelope.
What connector and voltage does the cooler require from the system?
It uses a 3-pin connector and expects a 12 V supply from the motherboard or fan controller.
Will the 32 mm thick blower fit in a standard 120 mm fan mount alongside existing components?
The 120 mm frame matches common mounts, but the 32 mm depth needs clearance behind the mounting surface.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
