אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 60mm blower fan with 3-pin connector

OEM Industries

OEM Industries TYF400LJ03 D06F-12B1S2 60mm blower fan

SKU CH-TVHC-9RP9T

A 60 mm blower fan with ball bearing, 3-pin connector, 12 V and 0.29 A draw

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 12 V 0.29 A blower fan delivers focused airflow for tight spaces
  • 60 mm ball-bearing design keeps noise low and lifespan long
  • 3-pin power connector fits standard motherboard headers without adapters
  • 60 × 25 mm frame slides into slim projector or small-form-factor cases
  • Blower layout pushes air across heatsinks instead of recirculating it

60mm blower fan for tight builds

This 60mm blower fan draws air through a narrow duct and exhausts it directly out of the chassis, making it suited for small-form-factor cases, projector housings or industrial enclosures where a conventional axial fan cannot fit. The three-pin 12V connector provides standard motherboard or controller compatibility for speed monitoring. It targets builders who need focused airflow in a 60 by 25mm footprint.

Ball-bearing motor runs at 12V 0.29A

The ball-bearing design reduces friction compared with sleeve alternatives, helping the fan maintain consistent speed under continuous load. At 12V and 0.29A the unit draws modest power while delivering directed cooling to hotspots such as voltage-regulator modules or compact GPU heatsinks. Noise level varies with voltage control; the blower geometry concentrates sound in the exhaust path rather than broad turbulence.

No LED lighting or bundled accessories

The package contains only the fan itself, so no RGB cables, mounting screws or software utilities are included. This keeps the installation simple for users who already have 3-pin headers and mounting hardware. Buyers who want PWM control, addressable lighting or a complete cooler kit with heatsink and brackets will need to source those separately.

נקודות עיקריות

  • 12 V 0.29 A blower fan delivers focused airflow for tight spaces
  • 60 mm ball-bearing design keeps noise low and lifespan long
  • 3-pin power connector fits standard motherboard headers without adapters
  • 60 × 25 mm frame slides into slim projector or small-form-factor cases
  • Blower layout pushes air across heatsinks instead of recirculating it

מפרט טכני

ModelTYF400LJ03
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

שאלות על הפריט הזה

How do I install the TYF400LJ03 blower fan and which step is often missed?

Mount the 60 mm frame using the four corner holes, connect the 3-pin plug to a 12 V header, and verify the airflow direction arrow points toward the heatsink — skipping the arrow check is the common error.

What maintenance will the TYF400LJ03 ball-bearing fan need later?

The sealed ball bearing requires no lubrication; clean dust from the blower wheel and intake vents every few months with compressed air to maintain airflow.

What limit appears first when the TYF400LJ03 runs continuously at 12 V?

At 0.29 A the motor draws its rated power, so the first constraint is the thermal limit of the ball bearing — if case airflow is restricted the bearing temperature rises.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.