OWC 16GB DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM
- 16GB
- 240-Pin DDR3L ECC R…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
Single 16 GB DDR3 ECC registered RDIMM runs at 1333 MHz CL9 for compatible Supermicro server boards
Capacity 16GB
This 16GB DDR3 1333 PC3-10600 CL9 registered module is built for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 series motherboards. It targets administrators maintaining legacy workstations, servers or NAS appliances that require ECC registered memory. Standard desktop systems cannot use this module.
The kit consists of one 240-pin 1.5V 2Rx4 RDIMM that replaces Supermicro part MEMDR316LSL05ER13. Adding it increases total memory without mixing registered and unbuffered DIMMs, which the platform forbids. No heat spreader is fitted, so airflow in the chassis must handle thermal load.
The DDR3 1333 bus caps bandwidth at PC3-10600 speeds, and registered signalling adds one cycle of latency versus unbuffered modules. Capacity per slot is fixed at 16GB with this rank configuration, so total system memory depends on the motherboard slot count. Mixing with non-ECC or unbuffered memory is not supported.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R416GB |
| Capacity | 16GB |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X8DA6 Series Supermicro Motherboard X8DAE Series Supermicro Motherboard X8DAH+ Series Supermicro Motherboard X8DAL Series Supermicro Motherboard X8DT3 Series |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
No firmware or battery maintenance is required; the module is a passive DDR3 component validated to JEDEC and RoHS standards.
The registered buffer and ECC logic add one cycle of latency, so command-to-data timing becomes the bottleneck before thermal or power limits.
It operates at standard 1.5 V DDR3 voltage with no heat spreader, so power draw and heat output match typical JEDEC PC3-10600 registered DIMMs.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?