OWC 16GB DDR4 3200 CL22 ECC Unbuffered UDIMM desktop RAM
- 16GB
- DDR4 3200 (PC4 2560…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
Dual-channel 32 GB DDR4-3200 ECC unbuffered kit runs at 1.2 V with CL22 latency for workstations, servers and NAS systems
Capacity 32GB (2 x 16GB)
This OWC kit supplies 32GB of DDR4 memory in a matched pair of 16GB modules. It is rated for 3200MHz operation with CL22 latency and includes ECC error correction for data integrity. The unbuffered UDIMM design targets workstations, servers and NAS systems that require reliable, standard-voltage memory.
Verify that your motherboard or system accepts 288-pin DDR4 UDIMMs with ECC support enabled. The modules run at 1.2V and are backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds. Confirm the board's maximum capacity per slot and total supported memory before ordering.
Each module uses a black PCB without a heat spreader, keeping the profile low for tight DIMM spacing. The 288-pin gold-edge connectors seat firmly in standard desktop slots and require no extra cables or software. JEDEC and RoHS compliance means the kit meets industry specifications for a straightforward, warranty-safe upgrade.
| Brand | OWC |
|---|---|
| Part Number | 3E2D41R8032P |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
The modules are ECC unbuffered UDIMMs; they will only operate with ECC functionality on motherboards that explicitly support ECC. On non-ECC boards they may not be recognised or may run without error correction.
Yes, the kit is backward compatible with 2133, 2400, 2666 and 2933 MHz speeds. When mixed, all modules will run at the lowest common speed and the loosest timings present in the system.
The modules have no heat spreader, keeping the profile low. This makes them compatible with most oversized CPU coolers that leave standard DIMM clearance.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?