אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Grey ATX power supply unit with single fan visible

Replace Power

Replace Power RPSU-C99-47 ATX power supply

SKU CH-T99M-38XW2 MPN RPSU-C99-47

ATX power supply with 20+4 pin, 12V, SATA, LP4 and floppy connectors fits eMachines T3104 T3107 T3110 T3112 T3114 T3116 and switches between 115 V and 230 V input

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for eMachines T3104 T3107 T3110 T3112 T3114 T3116
  • Switchable 115/230 V input suits global mains voltages
  • Compact 5.9" depth fits tight chassis spaces
  • 80 mm fan provides active cooling for stable operation
  • 20+4 pin ATX plus SATA and LP4 connectors cover legacy and modern parts

Replacement for eMachines T3104 T3107 T3110 T3112

This Replace Power RPSU-C99-47 ATX power supply is a direct replacement for the listed eMachines desktop models. It fits the original mounting points and uses a reduced depth of 5.9 inches by 3.4 inches wide for increased case compatibility. The unit weighs 2.5 units and includes a single 80mm cooling fan. Builders restoring or repairing these specific systems will find it a suitable fit.

Input voltage 115 230 V switchable capacity

The power supply accepts 115 V or 230 V input via a manual switch, matching the original specifications for the target eMachines range. It delivers power through a 20+4 pin ATX connector, one 12V ATX connector, two LP4 connectors, three SATA connectors and one floppy connector. Systems requiring additional PCIe power cables or more than three SATA devices will run out of native connections.

Bundled connectors support legacy and current drives

The included cable set provides one 20+4 pin motherboard plug compatible with both 20-pin and 24-pin boards, one 12V ATX plug, two LP4 peripheral plugs, three SATA power plugs and one floppy power plug. This mix lets you connect older IDE devices alongside modern SATA storage without adapters. Builders needing PCIe graphics power or more than three SATA ports must source separate adapters.

נקודות עיקריות

  • Direct replacement for eMachines T3104 T3107 T3110 T3112 T3114 T3116
  • Switchable 115/230 V input suits global mains voltages
  • Compact 5.9" depth fits tight chassis spaces
  • 80 mm fan provides active cooling for stable operation
  • 20+4 pin ATX plus SATA and LP4 connectors cover legacy and modern parts

מפרט טכני

BrandReplace Power
ModelRPSU-C99-47
ColorGrey
TypeATX
Fans1
Weight2.5

שאלות על הפריט הזה

Will the 20+4 pin ATX and 12V ATX connectors on this RPSU-C99-47 fit the motherboard in my eMachines T3110?

Yes, the 20+4 pin ATX connector supports both 20-pin and 24-pin motherboard sockets, and the 12V ATX connector is included for the CPU power required by eMachines T3104 T3107 T3110 T3112 T3114 T3116 models.

How can I confirm the 80mm fan and 115/230 V switch are operating correctly after installing the RPSU-C99-47?

Verify the 80mm fan spins at power-on, set the voltage switch to 115 V or 230 V to match your mains supply, and check that the system posts and drives connected to the three SATA ports receive power.

Does the box include SATA data cables or only the three SATA power connectors listed for the RPSU-C99-47?

The unit provides three SATA power connectors, two LP4 connectors, one floppy connector, one 20+4 pin ATX connector and one 12V ATX connector; SATA data cables are not included and must be purchased separately.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.