אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Grey ATX power supply unit with single fan and multiple cables

Replace Power

Replace Power RPSU-C99-68 420W ATX power supply

SKU CH-DFEK-CB5G2 MPN RPSU-C99-68

420 W ATX power supply with 80 mm cooling fan and 20+4 pin, SATA and peripheral connectors for eMachines T2245, T2260, T2341, T2482, T2484 and T2542 systems

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 420W output powers compatible eMachines and other desktop systems
  • Switchable 110V or 220V input suits different mains voltages
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Included SATA connector supports SATA drives
  • Single 80mm fan provides active cooling

Replacement PSU for eMachines T2245 T2260 T2341

This 420 watt ATX unit replaces the original power supply in eMachines T2245 T2260 T2341 T2482 T2484 T2542 desktops. It provides a 20+4 pin ATX connector a 12V ATX connector SATA power and multiple peripheral plugs. A switchable 110V 220V input suits different mains voltages. One 80mm fan handles cooling.

Suits owners of listed eMachines models needing

Builders who need higher wattage for modern graphics cards should look elsewhere. Systems requiring PCIe power connectors for dedicated GPUs cannot use this unit. It lacks 80 Plus efficiency certification. Compact cases needing SFX or TFX form factors are not compatible.

Single 420W rail with 20+4 pin ATX and SATA

The 420 watt rating and the 20+4 pin ATX connector decide if this unit fits the motherboard power socket. The included 12V ATX connector SATA plug and peripheral leads cover the drives and fans in the target eMachines chassis. No PCIe connectors are present.

נקודות עיקריות

  • 420W output powers compatible eMachines and other desktop systems
  • Switchable 110V or 220V input suits different mains voltages
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Included SATA connector supports SATA drives
  • Single 80mm fan provides active cooling

מפרט טכני

BrandReplace Power
ModelRPSU-C99-68
ColorGrey
TypeATX
Fans1
Weight0.1

שאלות על הפריט הזה

Does this 420W ATX unit need any extra cables or adapters to connect to the motherboard and drives?

The 20+4 pin ATX connector, 12V ATX connector, one SATA connector, two large peripheral connectors and two small peripheral connectors are all built into the unit so no separate cables are required.

Will the 14-inch ATX12V lead reach the socket on an older eMachines T2245 board without strain?

The 12V ATX connector is on a 14-inch lead which matches the routing distance used in the listed eMachines models, so it reaches the socket directly.

How can I confirm the 80mm fan is spinning correctly after I install the RPSU-C99-68?

Power the system on; the single 80mm fan should start immediately and you will feel steady airflow from the rear grille.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.