SAMSUNG
SAMSUNG 16GB DDR4-2933 ECC REG DIMM server RAM
Registered 16 GB DDR4-2933 ECC DIMM with 1.20 V operation for server workloads
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB capacity supports larger server workloads
- DDR4 2933 speed delivers 23400 MT/s bandwidth
- ECC registered design corrects data errors automatically
- 20 V operation reduces power draw per module
- Supermicro certified for validated compatibility
16GB DDR4-2933 ECC Registered DIMM
This 16GB Samsung DDR4-2933 module runs at 1.20V with ECC and registered buffering. It is built for servers and workstations that require error-correcting memory. The PC4-23400 rating matches platforms specifying this speed grade.
Suits ECC platforms; not for non-ECC boards
This module suits systems that support DDR4-2933 ECC registered memory. It will not function in consumer desktops or laptops that accept only unbuffered non-ECC DIMMs. Buyers needing standard unbuffered memory should look at a different product.
Registered ECC buffer decides compatibility
The registered buffer and ECC function are the single specification that determines whether this DIMM fits your platform. Verify that your motherboard and CPU explicitly support registered ECC DDR4-2933 before purchasing.
נקודות עיקריות
- 16 GB capacity supports larger server workloads
- DDR4 2933 speed delivers 23400 MT/s bandwidth
- ECC registered design corrects data errors automatically
- 20 V operation reduces power draw per module
- Supermicro certified for validated compatibility
מפרט טכני
| Capacity | 16GB |
|---|---|
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
שאלות על הפריט הזה
Will this module run in a system that only accepts 1.35 V DDR4?
This DIMM is rated at 1.20 V; it will not operate in a slot that requires 1.35 V.
Does the registered buffer on this 16 GB DDR4-2933 stick prevent mixing with unbuffered ECC modules?
Yes, registered and unbuffered ECC DIMMs cannot be used together in the same memory channel.
What should I see in the BIOS to confirm the 2933 MT/s speed is active after installing the MEM-DR416L-SL02-ER29?
The BIOS memory information should show DDR4-2933 (PC4-23400) with ECC and registered mode enabled.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.



