אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Silver 3.5 inch internal hard drive with circuit board visible underneath

Seagate

Seagate ST10000NM017B Exos 7E10 10 TB 7200 RPM 256 MB SATA 6.0 Gb/s 3.5" internal hard drive

SKU CH-Y9AD-YXJCM MPN ST10000NM017B

Enterprise 10 TB hard drive with 7200 RPM and 256 MB cache for 24×7 bulk data storage

  • InterfaceSATA 6.0Gb/s
  • Capacity10TB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms
  • 10 TB capacity for bulk data storage
  • 7200 RPM with 256 MB cache for high performance
  • SATA 6.0 Gb/s interface for enterprise connectivity
  • 16 ms average latency for responsive access
  • 24×7 operation rating for continuous reliability

Capacity and interface

The Seagate Exos 7E10 ST10000NM017B is a 10 TB 3.5 inch internal hard drive with a SATA 6.0 Gb/s interface. It spins at 7200 RPM and includes a 256 MB cache for sustained throughput in bulk-data workloads. The drive is built for 24×7 operation in enterprise storage arrays and servers. Average latency is rated at 4.16 ms.

Enterprise workloads and limits

This drive suits operators who need high-capacity, nearline storage for sequential workloads such as backup, archiving or media repositories. It is not for users who require the low latency or high IOPS of solid-state media, nor for systems that lack a 3.5 inch bay and standard SATA power and data connections.

SATA 6.0 Gb/s interface

The single specification that decides fit is the SATA 6.0 Gb/s interface; the host must provide a compatible SATA port and 3.5 inch mounting space. The physical dimensions are 147.00 mm length, 101.85 mm width and 26.11 mm height. Verify that the chassis and backplane support these measurements before purchase.

נקודות עיקריות

  • 10 TB capacity for bulk data storage
  • 7200 RPM with 256 MB cache for high performance
  • SATA 6.0 Gb/s interface for enterprise connectivity
  • 16 ms average latency for responsive access
  • 24×7 operation rating for continuous reliability

מפרט טכני

BrandSeagate
SeriesExos 7E10
ModelST10000NM017B
InterfaceSATA 6.0Gb/s
Capacity10TB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesEnterprise Drive for Bulk Data Applications
Robust Bulk Data Storage for a 24×7 World
High Performance for Mainstream Data Center Applications
Enhanced Reliability, Data Protection, and Security
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)147.00mm
משקל משלוח0.73 kg
מידות האריזה152 × 102 × 25 mm

שאלות על הפריט הזה

How can I verify the ST10000NM017B is running at 7200 RPM after installation?

Use a SMART monitoring tool to confirm the spindle speed reads 7200 RPM and check that average latency sits near 4.16 ms during idle operation.

What ships with the Exos 7E10 10 TB drive and what must I source separately?

The drive itself is included; SATA data and power cables, mounting screws and any hot-swap tray are not supplied and must be purchased separately.

Which capacity version of the Exos 7E10 line should I choose for a 24×7 bulk-storage array?

The 10 TB model provides 10 TB of raw capacity with 256 MB cache, matching the density and performance targets for mainstream enterprise workloads.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.