אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
White mid-tower case with wooden front trim and tempered glass side panel

Thermaltake

Thermaltake CA-11J-00M6WN-00 S370 WS PC case

SKU CH-PG3W-4YSAT MPN CA-11J-00M6WN-00

Mid-tower chassis with wood front trim, tempered-glass side panel and four pre-installed 120 mm PWM fans, supporting E-ATX boards, 360 mm radiators, 410 mm graphics cards and 175 mm CPU coolers

  • TypeE-ATX/ATX/mATX/mITX
  • ColorSnow
  • Side Panel1 x Side Tempered Glass Panel
  • Fan Options4x120mm CT120 PWM Fans
  • Pre-installed FansRear - 1 x 120mm / Side - 3 x 120mm
  • 120mm Fans9
  • Wood front trim adds natural accent to clean design
  • Mesh intake and tempered glass balance airflow with visibility
  • Hidden-connector motherboard cutouts enable cleaner cable routing
  • Supports 360 mm radiators and 410 mm GPUs for high-end builds
  • Four pre-installed 120 mm PWM fans deliver immediate cooling

S370 WS mid-tower chassis

The Thermaltake S370 WS is a mid-tower case that supports E-ATX, ATX, mATX and mITX motherboards. Wooden trims flank the front mesh for a distinctive accent. Four CT120 PWM fans are pre-installed, three at the front and one at the rear. A single tempered-glass side panel shows the interior.

Cooling limits of the 360mm radiator standard

The chassis accepts radiators up to 360mm and up to nine 120mm or eight 140mm fans in total. Graphics cards up to 410mm long will fit. CPU air coolers must not exceed 175mm in height. Power supplies are limited to 200mm in length. These dimensions set the practical boundary for high-performance builds.

Installation notes for hidden-connector motherboards

Extra cut-outs allow ATX and mATX hidden-connector boards such as ASUS BTF, MSI PROJECT ZERO and GIGABYTE PROJECT STEALTH to route cables cleanly. The pre-installed fans arrive mounted, reducing initial assembly steps. Builders who need more than 200mm PSU length or taller air coolers will find this chassis unsuitable.

נקודות עיקריות

  • Wood front trim adds natural accent to clean design
  • Mesh intake and tempered glass balance airflow with visibility
  • Hidden-connector motherboard cutouts enable cleaner cable routing
  • Supports 360 mm radiators and 410 mm GPUs for high-end builds
  • Four pre-installed 120 mm PWM fans deliver immediate cooling

מפרט טכני

BrandThermaltake
SeriesThermaltake S370 WS
ModelCA-11J-00M6WN-00
TypeE-ATX/ATX/mATX/mITX
ColorSnow
Side Panel1 x Side Tempered Glass Panel
Fan Options4x120mm CT120 PWM Fans
Pre-installed FansRear - 1 x 120mm / Side - 3 x 120mm
120mm Fans9
Max GPU Length410mm GPU Clearance
Max CPU Cooler Height175mm Air Cooler Max Height
Max PSU Length200mm Max PSU Length
Dimensions20.4 x 18.7 x 9.3 inch
Weight20
משקל משלוח10.52 kg
מידות האריזה597 × 559 × 318 mm

שאלות על הפריט הזה

Will my 410 mm graphics card fit with the front fans installed?

The chassis allows 410 mm GPU clearance with the three pre-installed 120 mm front fans in place.

Does the case support a 360 mm radiator on the front?

Yes, the front panel can mount a 360 mm radiator alongside the included fans.

What motherboard sizes are compatible with the hidden-connector cut-outs?

The extra cut-outs are designed for ATX and mATX boards that use rear-mounted connectors.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.