אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black aluminium triple bay dock with two M.2 slots and one SATA bay

Vantec

Vantec NST-DM12C31 Triple Bay Dock with Clone Function

SKU CH-6ZSR-WQ2D3

Triple-bay dock holds two M.2 NVMe and one SATA drive with 10 Gbps USB and standalone cloning

  • ColorBlack
  • Size2.5"
  • MaterialAluminum
  • Internal InterfaceSATA
  • External InterfaceSATA
  • HDD Count SupportedSingle NVMe SSD
  • Supports two M.2 NVMe and one SATA drive simultaneously
  • Standalone sector-to-sector cloning without a host computer
  • USB 3.2 Gen 2x1 10 Gbps host connection
  • Tool-free access for 2.5 or 3.5 inch SATA drives
  • Aluminium construction aids heat dissipation for sustained operation

Triple Bay Dock for Two M.2 and One SATA Drive

This enclosure accepts two M.2 NVMe modules in sizes from 2230 to 25110 and one 2.5 or 3.5 inch SATA SSD or hard drive simultaneously. It is built for users who need to access three different drives at once or duplicate data between them without a host computer. The aluminium chassis dissipates heat during heavy transfer workloads.

USB 3.2 Gen 2x1 Limits Combined Throughput to 10

All three bays share a single 10 Gbps upstream link, so simultaneous full-speed reads from multiple drives will saturate the bus. Sector-to-sector cloning runs at roughly 1 TB per 20 minutes when both source and target are M.2 NVMe drives. The dock does not accelerate cloning beyond the interface ceiling, and SATA drives operate at their native 6 Gbps ceiling.

Tool-Free Insertion with One-Touch Clone Button

Drives slide into the M.2 slots and the SATA bay without screws; a single button starts a standalone clone when the dock is powered but not connected to a PC. The most common error is inserting an M.2 SATA module into an NVMe-only slot, which the dock will not recognise. Ensure the source drive capacity does not exceed the target, and verify alignment before pressing the clone button.

נקודות עיקריות

  • Supports two M.2 NVMe and one SATA drive simultaneously
  • Standalone sector-to-sector cloning without a host computer
  • USB 3.2 Gen 2x1 10 Gbps host connection
  • Tool-free access for 2.5 or 3.5 inch SATA drives
  • Aluminium construction aids heat dissipation for sustained operation

מפרט טכני

BrandVANTEC
Part NumberNST-DM12C31
ColorBlack
Size2.5"
MaterialAluminum
Internal InterfaceSATA
External InterfaceSATA
HDD Count SupportedSingle NVMe SSD
Number of Bay1
Maximum Capacity (per Bay)Up to 4TB
Specifications5.67 L x 3.27 W x 2.32 H inches, 10 gigabits_per_second, 2.5 inches, NST-DM12C31, Vantec, Heavy Duty ABS, Metal, Black, 10.2 ounces
Operating Systems SupportedPC, Mac, Linux
Features10 gigabits_per_second, 2.5 inches
Dimensions14.33in W x 12.83in H x 9.06in D
Weight10.2 ounces

שאלות על הפריט הזה

Should I choose the M.2 NVMe slots or the SATA bay for my 2.5″ drive?

The dock accepts two M.2 NVMe drives and one 2.5″ or 3.5″ SATA drive simultaneously, so you can use all three bays at once.

What does the 10 Gbps USB link mean for actual transfer speeds?

The USB 3.2 Gen 2x1 connection provides up to 10 Gbps bandwidth shared across whichever drives are active in the three bays.

Which M.2 form factors does the NVMe interface support?

The M.2 slots support 2230, 2242, 2260, 2280, 22110, 2580 and 25110 lengths for NVMe drives.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.