אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 100mm blower fan, 97 by 33mm, 3-pin connector

Zyvpee

Zyvpee BA10033B12S 100mm 12V 2.85A 3-pin blower fan

SKU CH-J21Y-BMTT3

A 100 mm DC blower fan with ball bearing, 12 V 2.85 A power and a 3-pin connector fits 97 × 33 mm mounts

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • 100 mm blower design directs airflow through tight spaces
  • Ball bearing ensures long service life and quiet operation
  • 12 V 2.85 A rating delivers strong static pressure
  • 3-pin connector fits standard motherboard headers
  • Compact 97 × 33 mm frame suits small-form-factor cases

100 mm DC blower fan

The Zyvpee BA10033B12S is a 100 mm blower-style case fan designed for directed airflow in tight chassis spaces. It runs on 12 V and draws 2.85 A through a three-pin power connector. Ball bearings support the rotor for consistent rotation. The black frame measures 97 by 33 mm and has no LED lighting.

Suited for focused cooling, not silent builds

This unit suits builders who need a compact blower to push air through heatsinks or restricted channels. It is not intended for users who prioritise low noise levels or high static pressure across large radiators. Buyers wanting addressable lighting or PWM speed control should consider other models. The fixed three-pin interface limits automatic fan-curve adjustment.

Straightforward three-pin installation

Mount the fan using standard 100 mm screw holes and connect the three-pin header to the motherboard or a fan controller. Ensure the connector key aligns before applying force to avoid bent pins. The blower orientation must match the intended airflow direction through the component. Verify clearance for the 33 mm depth inside the case before securing the screws.

נקודות עיקריות

  • 100 mm blower design directs airflow through tight spaces
  • Ball bearing ensures long service life and quiet operation
  • 12 V 2.85 A rating delivers strong static pressure
  • 3-pin connector fits standard motherboard headers
  • Compact 97 × 33 mm frame suits small-form-factor cases

מפרט טכני

BrandZyvpee
SeriesBA10033
ModelBA10033B12S
TypeCase Fan
CompatibilityCase
Fan Size100mm
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC blower
Dimensions97 * 33mm
Package Contentsrefer to title

שאלות על הפריט הזה

Does my case have a 12 V three-pin header to power this 100 mm blower?

Yes — the fan draws 2.85 A from a standard 12 V three-pin connector, so any motherboard or fan controller with that header will run it.

Will the 97 × 33 mm frame fit the same mounting holes as my old 100 mm axial fan?

The blower measures 97 mm square by 33 mm thick; hole spacing differs from typical axial fans, so you will need to verify the mounting pattern or use an adapter bracket.

How can I confirm the blower is spinning at the correct speed after installation?

Connect the three-pin lead to a monitored header and check the RPM reading in BIOS or fan-control software; a steady signal matching the 12 V rating shows the fan is operating as designed.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.