אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 60 x 25 mm 12 V 3-pin case fan with sleeve bearing

Zyvpee

Zyvpee KD1206PTS2 60x25mm 12V 1.1W 3-pin case fan

SKU CH-HJ2T-RZGHM

A 60 mm sleeve-bearing case fan running below 1600 RPM at 12 V and 1.1 W with a 3-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeSleeve Bearing
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Compact 60 x 25 mm frame fits tight CPU coolers
  • 12 V 1.1 W draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Sleeve bearing runs under 1600 RPM for quiet operation
  • Non-LED black design suits any build aesthetic

Compact 60 mm case fan for tight CPU coolers

The Zyvpee KD1206PTS2 is a 60 by 25 mm frame designed to sit on small-form-factor CPU coolers where larger fans will not fit. It draws 1.1 W at 12 V and spins below 1600 RPM, delivering focused airflow for compact builds.

Sleeve-bearing construction with three-pin power

A sleeve bearing keeps the rotor running quietly at low speeds, while the black plastic frame blends into most chassis interiors. The three-pin connector plugs directly into a standard motherboard header, allowing the board to monitor speed without PWM control.

Check header type and mounting clearance

Verify your motherboard offers a three-pin fan header; a four-pin header will work but speed regulation will be voltage-based only. Ensure the cooler’s mounting holes accept a 60 mm square frame and that 25 mm thickness does not foul nearby components or side panels.

נקודות עיקריות

  • Compact 60 x 25 mm frame fits tight CPU coolers
  • 12 V 1.1 W draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Sleeve bearing runs under 1600 RPM for quiet operation
  • Non-LED black design suits any build aesthetic

מפרט טכני

BrandZyvpee
SeriesKD1206PTS2
ModelKD1206PTS2
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeSleeve Bearing
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25MM

שאלות על הפריט הזה

What does the 3-pin connector limit for speed control?

The 3-pin connector supports voltage-based fan control only; it lacks a PWM wire for pulse-width modulation, so minimum speed is set by the lowest voltage the motherboard can supply.

Will the 60 mm by 25 mm frame fit my CPU cooler mounting holes?

The fan measures 60 mm square with a 25 mm thickness, matching the standard 6025 mounting pattern used on many low-profile CPU coolers.

How do I install the sleeve-bearing fan so it lasts?

Mount the fan with the label side facing up or vertically; avoid horizontal mounting with the label down, as that orientation starves the sleeve bearing of oil and shortens life.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.