אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 120mm by 38mm case fan with four-wire power connector

Zyvpee

Zyvpee PMD4812PMB1-A 12038 48V 14.9W 4 Pin Case Fan

SKU CH-XHZ2-4AGGS

A 120 mm by 38 mm case fan with ball bearing, 48 V operation and a 4-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 48 V power input enables efficient server-grade cooling
  • Ball bearing design extends operational lifespan under continuous load
  • 120 x 38 mm frame fits standard 12038 mounting points
  • Four-pin connector supports PWM speed control for precise airflow
  • 9 W rating delivers high static pressure for dense chassis

48 V 120 mm ball-bearing case fan

The Zyvpee PMD4812PMB1-A is a 120 mm by 38 mm case fan built for 48 V DC systems. It draws 14.9 W through a 4-pin connector and uses a ball bearing for continuous operation. The black, non-LED frame suits industrial or server chassis that require steady airflow. Buyers needing a 12 V or 5 V fan cannot use this model.

Four-pin PWM control at 48 V only

The 4-pin connector enables PWM speed regulation, but the fan is rated exclusively for a 48 V supply. Connecting it to a standard 12 V motherboard header will not work and may damage the motor. No adapter or voltage converter is included, so the host system must provide a native 48 V rail. Builders without a 48 V power source must choose a different fan.

Simple screw mount, verify voltage first

The 120 mm square frame fits standard case mounting holes using four screws. Installation is straightforward if the chassis already delivers 48 V to the fan header. The most common error is wiring the fan to a 12 V header, which leaves the fan inert or causes electrical stress. Confirm the system pin-out and voltage before fitting.

נקודות עיקריות

  • 48 V power input enables efficient server-grade cooling
  • Ball bearing design extends operational lifespan under continuous load
  • 120 x 38 mm frame fits standard 12038 mounting points
  • Four-pin connector supports PWM speed control for precise airflow
  • 9 W rating delivers high static pressure for dense chassis

מפרט טכני

BrandZyvpee
SeriesPMD4812PMB1-A
ModelPMD4812PMB1-A
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling Fan
Dimensions120*38MM

שאלות על הפריט הזה

Which version of this 120 mm × 38 mm fan should I choose for a 48 V system?

The PMD4812PMB1-A is the only version listed; it is built for 48 V DC input and draws 14.9 W.

What does the 14.9 W rating mean once the fan is installed in my chassis?

At 48 V the fan consumes 14.9 W, so your 48 V rail must deliver enough current for that load continuously.

How does the 4‑pin connector affect speed control with this fan?

The 4‑pin PWM connector lets the motherboard or fan controller vary the speed precisely while the fan runs on 48 V power.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.