A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx4 1.5V 240-Pin for HP Z420 Z620 Z820
- 8GB
- 240-Pin DDR3 SDRAM
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
A-Tech
16 GB DDR3 ECC registered kit with two 8 GB modules for HP Z420, Z620 and Z820 workstations
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR3 registered DIMMs built for HP Z420, Z620 and Z820 workstations. It targets users who need error-correcting memory for stable operation in professional applications.
Each module is a 240-pin DDR3-1600 RDIMM running at 1.5 V with CL11 latency and a 2Rx4 organisation. The registered buffer reduces electrical load on the memory controller, allowing the workstation to populate all available slots. ECC circuitry detects and corrects single-bit errors without halting the system.
The kit upgrades systems shipped with lower-capacity or slower DDR3 modules, raising total capacity to 16 GB and setting the memory bus to PC3-12800 speed. It is not suitable for platforms that require unbuffered ECC UDIMMs or non-ECC memory, and it cannot be mixed with those module types.
| Brand | A-Tech |
|---|---|
| Series | 2nd Gen. HP Z Workstation Compatible |
| Model | 16GB (2x8GB) 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820 |
| Part Number | NE-MS-0094 |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP Z Workstation Z420, Z620, Z820 |
| Option | Compatible with HP Z Workstation Z420, Z620, Z820 |
| Features | Designed for HP Z Workstation Z420, Z620, Z820 |
| Package Content | Two Modules |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The kit runs at DDR3-1600 CL11 with 2Rx4 registered ECC modules at 1.5 V; the workstation’s memory controller and BIOS set the practical sustained-throughput ceiling.
The modules have no heat spreader and draw 1.5 V at DDR3-1600; they add minimal heat and zero noise, relying on the chassis fans already present in the Z420, Z620 or Z820.
A Z420, Z620 or Z820 with free 240-pin DDR3 slots that support registered ECC memory and a BIOS configured for RDIMM operation.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?