Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

A-Tech

A-Tech 16GB Kit (2x8GB) DDR3-1600 ECC RDIMM 2Rx4 HP Z420 Z620 Z820

SKU CH-GQYP-V8E38

16 GB DDR3 ECC registered kit with two 8 GB modules for HP Z420, Z620 and Z820 workstations

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • 16 GB ECC RDIMM kit for HP Z420 Z620 Z820
  • DDR3 1600 MHz CL11 registered memory with 2Rx4 organisation
  • 5 V 240-pin DIMM modules for stable server workloads
  • Two 8 GB modules tested for reliability and lifetime warranty
  • Designed specifically for second-generation HP Z workstations

HP Z Workstation Memory Upgrade

This 16 GB kit contains two 8 GB DDR3 registered DIMMs built for HP Z420, Z620 and Z820 workstations. It targets users who need error-correcting memory for stable operation in professional applications.

Registered ECC Modules for Quad-Channel Platforms

Each module is a 240-pin DDR3-1600 RDIMM running at 1.5 V with CL11 latency and a 2Rx4 organisation. The registered buffer reduces electrical load on the memory controller, allowing the workstation to populate all available slots. ECC circuitry detects and corrects single-bit errors without halting the system.

Replaces Slower or Smaller Factory Memory

The kit upgrades systems shipped with lower-capacity or slower DDR3 modules, raising total capacity to 16 GB and setting the memory bus to PC3-12800 speed. It is not suitable for platforms that require unbuffered ECC UDIMMs or non-ECC memory, and it cannot be mixed with those module types.

Ciri-ciri utama

  • 16 GB ECC RDIMM kit for HP Z420 Z620 Z820
  • DDR3 1600 MHz CL11 registered memory with 2Rx4 organisation
  • 5 V 240-pin DIMM modules for stable server workloads
  • Two 8 GB modules tested for reliability and lifetime warranty
  • Designed specifically for second-generation HP Z workstations

Spesifikasi

BrandA-Tech
Series2nd Gen. HP Z Workstation Compatible
Model16GB (2x8GB) 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820
Part NumberNE-MS-0094
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP Z Workstation Z420, Z620, Z820
OptionCompatible with HP Z Workstation Z420, Z620, Z820
FeaturesDesigned for HP Z Workstation Z420, Z620, Z820
Package ContentTwo Modules

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Does the dual-rank 2Rx4 organisation and 1.5 V voltage cap how far I can push sustained throughput on a Z420, Z620 or Z820?

The kit runs at DDR3-1600 CL11 with 2Rx4 registered ECC modules at 1.5 V; the workstation’s memory controller and BIOS set the practical sustained-throughput ceiling.

How much heat and noise should I expect when the two 8 GB RDIMMs run all day in a loaded workstation?

The modules have no heat spreader and draw 1.5 V at DDR3-1600; they add minimal heat and zero noise, relying on the chassis fans already present in the Z420, Z620 or Z820.

What must my HP Z workstation already have to accept this 240-pin DDR3 ECC RDIMM kit?

A Z420, Z620 or Z820 with free 240-pin DDR3 slots that support registered ECC memory and a BIOS configured for RDIMM operation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.