暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3 ECC RDIMM modules with gold contacts, no heat spreaders

A-Tech

A-Tech 16GB Kit (2x8GB) DDR3-1600 ECC RDIMM 2Rx4 HP Z420 Z620 Z820

SKU CH-GQYP-V8E38

16 GB DDR3 ECC registered kit with two 8 GB modules for HP Z420, Z620 and Z820 workstations

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB ECC RDIMM kit for HP Z420 Z620 Z820
  • DDR3 1600 MHz CL11 registered memory with 2Rx4 organisation
  • 5 V 240-pin DIMM modules for stable server workloads
  • Two 8 GB modules tested for reliability and lifetime warranty
  • Designed specifically for second-generation HP Z workstations

HP Z Workstation Memory Upgrade

This 16 GB kit contains two 8 GB DDR3 registered DIMMs built for HP Z420, Z620 and Z820 workstations. It targets users who need error-correcting memory for stable operation in professional applications.

Registered ECC Modules for Quad-Channel Platforms

Each module is a 240-pin DDR3-1600 RDIMM running at 1.5 V with CL11 latency and a 2Rx4 organisation. The registered buffer reduces electrical load on the memory controller, allowing the workstation to populate all available slots. ECC circuitry detects and corrects single-bit errors without halting the system.

Replaces Slower or Smaller Factory Memory

The kit upgrades systems shipped with lower-capacity or slower DDR3 modules, raising total capacity to 16 GB and setting the memory bus to PC3-12800 speed. It is not suitable for platforms that require unbuffered ECC UDIMMs or non-ECC memory, and it cannot be mixed with those module types.

特長

  • 16 GB ECC RDIMM kit for HP Z420 Z620 Z820
  • DDR3 1600 MHz CL11 registered memory with 2Rx4 organisation
  • 5 V 240-pin DIMM modules for stable server workloads
  • Two 8 GB modules tested for reliability and lifetime warranty
  • Designed specifically for second-generation HP Z workstations

仕様

BrandA-Tech
Series2nd Gen. HP Z Workstation Compatible
Model16GB (2x8GB) 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820
Part NumberNE-MS-0094
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP Z Workstation Z420, Z620, Z820
OptionCompatible with HP Z Workstation Z420, Z620, Z820
FeaturesDesigned for HP Z Workstation Z420, Z620, Z820
Package ContentTwo Modules

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the dual-rank 2Rx4 organisation and 1.5 V voltage cap how far I can push sustained throughput on a Z420, Z620 or Z820?

The kit runs at DDR3-1600 CL11 with 2Rx4 registered ECC modules at 1.5 V; the workstation’s memory controller and BIOS set the practical sustained-throughput ceiling.

How much heat and noise should I expect when the two 8 GB RDIMMs run all day in a loaded workstation?

The modules have no heat spreader and draw 1.5 V at DDR3-1600; they add minimal heat and zero noise, relying on the chassis fans already present in the Z420, Z620 or Z820.

What must my HP Z workstation already have to accept this 240-pin DDR3 ECC RDIMM kit?

A Z420, Z620 or Z820 with free 240-pin DDR3 slots that support registered ECC memory and a BIOS configured for RDIMM operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。