暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 128GB (8 x 16GB) DDR3 1600 RDIMM ECC Registered Memory Upgrade for HP Z420 Z620 Z820

SKU CH-RVES-ZRM3V

Eight 16 GB DDR3-1600 registered ECC modules delivering 128 GB for HP Z420, Z620 and Z820 workstations

  • Capacity128GB (8 x 16GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • 128 GB maximum capacity using eight 16 GB modules
  • DDR3 1600 MHz RDIMM with CL11 latency for stable throughput
  • ECC registered design protects data integrity on Z420 Z620 Z820
  • 50 V operation matches factory power requirements
  • 240 pin dual rank x4 layout fits workstation memory slots

HP Z420 Z620 Z820 max-capacity kit

This 128GB kit fills every DIMM slot on second-generation HP Z Workstation Z420, Z620 and Z820 models. It is built for professionals who need the highest supported memory capacity for virtualisation, rendering or large-dataset workloads on these specific platforms. Buyers who want more storage or a different memory generation will not be served by this product.

Registered ECC DDR3 1600 2Rx4 specification

The modules are DDR3 1600 (PC3-12800) RDIMMs with ECC, 2Rx4 organisation and 1.50V operation. This exact combination of registered buffering, error correction, dual-rank x4 layout and voltage is what the Z420, Z620 and Z820 memory controller expects for full 128GB operation. Mixing with unbuffered ECC UDIMMs is not supported.

Eight-module installation follows manual channel

Installation means placing all eight 240-pin DIMMs into the correct channels as shown in the workstation service manual. The most common issue is populating slots in the wrong order, which prevents the system from recognising the full 128GB or forces a slower speed. No heat spreaders are fitted, so clearance is standard.

特長

  • 128 GB maximum capacity using eight 16 GB modules
  • DDR3 1600 MHz RDIMM with CL11 latency for stable throughput
  • ECC registered design protects data integrity on Z420 Z620 Z820
  • 50 V operation matches factory power requirements
  • 240 pin dual rank x4 layout fits workstation memory slots

仕様

BrandA-Tech
Series2nd Gen. HP Z Workstation Compatible
Model128GB (8x16GB) 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820 (Max Memory)
Part NumberNE-MS-0099
Capacity128GB (8 x 16GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP Z Workstation Z420, Z620, Z820
OptionCompatible with HP Z Workstation Z420, Z620, Z820
FeaturesDesigned for HP Z Workstation Z420, Z620, Z820
Package ContentEight Modules

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 128GB total capacity mean for my HP Z420, Z620 or Z820 workstation?

This kit fills all available DIMM slots to reach the maximum supported memory, letting the workstation handle large datasets, virtual machines and multi-application workloads without paging to disk.

How does the PC3-12800R rating affect real-world speed in these workstations?

The modules run at DDR3 1600MHz; the registered buffer adds one cycle of latency, so the system operates at the rated 1600MHz transfer rate while maintaining signal integrity across all eight slots.

Will the 240-pin registered DIMMs fit the memory sockets on my Z420, Z620 or Z820?

Yes, each module uses the standard 240-pin DDR3 RDIMM form factor with 2Rx4 organisation, matching the workstation's registered memory slots and allowing all eight to be installed simultaneously.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。