Acumen Disc AD04-OP600 1-to-4 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 4
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Acumen Disc
Standalone duplicator copies up to four SATA hard drives or SSDs at 300 MB/s with seven DoD-compliant erase modes
Data Transfer Rate 300MB/s
The Acumen Disc AD04-OP300 is a standalone flatbed duplicator that copies one source SATA drive to up to four targets simultaneously. It handles both 3.5" and 2.5" hard disks and solid-state drives without adapters. The unit operates independently of a host computer, using an Athena controller and 128MB buffer to sustain transfer rates of 300MB/s per slot. It also provides seven sanitisation modes compliant with DoD 5220.22-M standards.
IT departments, forensic labs, and data-recovery technicians who need rapid, unattended duplication of SATA media will benefit from the four-target throughput and hardware-based erase modes. The system is not for users who require duplication of non-SATA interfaces, nor for workflows that depend on software-driven imaging, network connectivity, or support for drive form factors other than 2.5" and 3.5" SATA.
The sustained 300MB/s data transfer rate per target slot determines whether the duplicator meets your production window. If your drives cannot saturate this bandwidth or your batch sizes demand higher aggregate throughput, the specification will be the limiting factor.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Model | Acumen Disc HDD Flatbed |
| Part Number | AD04-OP300 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 4 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
You need up to four SATA 3.5" or 2.5" hard drives or SSDs; the flatbed accepts them directly without trays or adapters.
Yes, it supports both SATA I and SATA II drives at the same 300 MB/s transfer rate per slot.
The LCD display and indication lights show progress and completion for each erase mode, including DoD 5220.22-M.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?