Acumen Disc AD04-OP600 1-to-4 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 4
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Acumen Disc
Standalone duplicator copies up to four SATA hard drives or SSDs at 300 MB/s with seven DoD-compliant erase modes
Data Transfer Rate 300MB/s
The Acumen Disc AD04-OP300 is a standalone flatbed duplicator that copies one source SATA drive to up to four targets simultaneously. It handles both 3.5" and 2.5" hard disks and solid-state drives without adapters. The unit operates independently of a host computer, using an Athena controller and 128MB buffer to sustain transfer rates of 300MB/s per slot. It also provides seven sanitisation modes compliant with DoD 5220.22-M standards.
IT departments, forensic labs, and data-recovery technicians who need rapid, unattended duplication of SATA media will benefit from the four-target throughput and hardware-based erase modes. The system is not for users who require duplication of non-SATA interfaces, nor for workflows that depend on software-driven imaging, network connectivity, or support for drive form factors other than 2.5" and 3.5" SATA.
The sustained 300MB/s data transfer rate per target slot determines whether the duplicator meets your production window. If your drives cannot saturate this bandwidth or your batch sizes demand higher aggregate throughput, the specification will be the limiting factor.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Model | Acumen Disc HDD Flatbed |
| Part Number | AD04-OP300 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 4 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
You need up to four SATA 3.5" or 2.5" hard drives or SSDs; the flatbed accepts them directly without trays or adapters.
Yes, it supports both SATA I and SATA II drives at the same 300 MB/s transfer rate per slot.
The LCD display and indication lights show progress and completion for each erase mode, including DoD 5220.22-M.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?