我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black flatbed duplicator with four open SATA drive slots and front indicator lights

Acumen Disc

Acumen Disc AD04-OP300 1-to-4 Flatbed Hard Drive Duplicator

SKU CH-YMB9-NEV9E

Standalone duplicator copies up to four SATA hard drives or SSDs at 300 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorSATA
  • Target1 to 4
  • Buffer Memory128M

Target 1 to 4

Data Transfer Rate 300MB/s

  • Duplicates up to 4 SATA drives simultaneously at 300 MB/s
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 5220.22-M 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no PC or software required for secure duplication

1-to-4 SATA Duplicator with DoD Erase

The Acumen Disc AD04-OP300 is a standalone flatbed duplicator that copies one source SATA drive to up to four targets simultaneously. It handles both 3.5" and 2.5" hard disks and solid-state drives without adapters. The unit operates independently of a host computer, using an Athena controller and 128MB buffer to sustain transfer rates of 300MB/s per slot. It also provides seven sanitisation modes compliant with DoD 5220.22-M standards.

Suited for high-volume cloning

IT departments, forensic labs, and data-recovery technicians who need rapid, unattended duplication of SATA media will benefit from the four-target throughput and hardware-based erase modes. The system is not for users who require duplication of non-SATA interfaces, nor for workflows that depend on software-driven imaging, network connectivity, or support for drive form factors other than 2.5" and 3.5" SATA.

300MB/s per-slot throughput decides fit

The sustained 300MB/s data transfer rate per target slot determines whether the duplicator meets your production window. If your drives cannot saturate this bandwidth or your batch sizes demand higher aggregate throughput, the specification will be the limiting factor.

商品特色

  • Duplicates up to 4 SATA drives simultaneously at 300 MB/s
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 5220.22-M 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no PC or software required for secure duplication

商品規格

BrandAcumen Disc
TypeHard Drive Duplicator
ModelAcumen Disc HDD Flatbed
Part NumberAD04-OP300
Panel ColorBlack
Operating TypeStandalone
ConnectorSATA
Target1 to 4
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

其他版本

同系列還有 4 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What SATA drives must I already have to use the four target slots on the AD04-OP300?

You need up to four SATA 3.5" or 2.5" hard drives or SSDs; the flatbed accepts them directly without trays or adapters.

Will the duplicator work with older SATA I drives I still keep?

Yes, it supports both SATA I and SATA II drives at the same 300 MB/s transfer rate per slot.

How can I confirm the AD04-OP300 finished a DoD 3-pass erase correctly?

The LCD display and indication lights show progress and completion for each erase mode, including DoD 5220.22-M.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。