저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black flatbed duplicator with four open SATA drive slots and front indicator lights

Acumen Disc

Acumen Disc AD04-OP300 1-to-4 Flatbed Hard Drive Duplicator

SKU CH-YMB9-NEV9E

Standalone duplicator copies up to four SATA hard drives or SSDs at 300 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorSATA
  • Target1 to 4
  • Buffer Memory128M

Target 1 to 4

Data Transfer Rate 300MB/s

  • Duplicates up to 4 SATA drives simultaneously at 300 MB/s
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 5220.22-M 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no PC or software required for secure duplication

1-to-4 SATA Duplicator with DoD Erase

The Acumen Disc AD04-OP300 is a standalone flatbed duplicator that copies one source SATA drive to up to four targets simultaneously. It handles both 3.5" and 2.5" hard disks and solid-state drives without adapters. The unit operates independently of a host computer, using an Athena controller and 128MB buffer to sustain transfer rates of 300MB/s per slot. It also provides seven sanitisation modes compliant with DoD 5220.22-M standards.

Suited for high-volume cloning

IT departments, forensic labs, and data-recovery technicians who need rapid, unattended duplication of SATA media will benefit from the four-target throughput and hardware-based erase modes. The system is not for users who require duplication of non-SATA interfaces, nor for workflows that depend on software-driven imaging, network connectivity, or support for drive form factors other than 2.5" and 3.5" SATA.

300MB/s per-slot throughput decides fit

The sustained 300MB/s data transfer rate per target slot determines whether the duplicator meets your production window. If your drives cannot saturate this bandwidth or your batch sizes demand higher aggregate throughput, the specification will be the limiting factor.

주요 특징

  • Duplicates up to 4 SATA drives simultaneously at 300 MB/s
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 5220.22-M 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no PC or software required for secure duplication

사양

BrandAcumen Disc
TypeHard Drive Duplicator
ModelAcumen Disc HDD Flatbed
Part NumberAD04-OP300
Panel ColorBlack
Operating TypeStandalone
ConnectorSATA
Target1 to 4
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What SATA drives must I already have to use the four target slots on the AD04-OP300?

You need up to four SATA 3.5" or 2.5" hard drives or SSDs; the flatbed accepts them directly without trays or adapters.

Will the duplicator work with older SATA I drives I still keep?

Yes, it supports both SATA I and SATA II drives at the same 300 MB/s transfer rate per slot.

How can I confirm the AD04-OP300 finished a DoD 3-pass erase correctly?

The LCD display and indication lights show progress and completion for each erase mode, including DoD 5220.22-M.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.