Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

Computer Memory Solutions

Computer Memory Solutions CM5126410600DIMM 4GB DDR3 1333MHz for HP 6000 Pro SFF Microtower memory upgrade

SKU CH-CER3-3Z95D

4GB DDR3 1333MHz DIMM module for HP 6000 Pro SFF and Microtower desktops

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4GB DDR3 1333MHz boosts HP 6000 Pro responsiveness
  • Non-ECC unbuffered 240-pin DIMM installs in seconds
  • Guaranteed compatibility with SFF and Microtower 6000 Pro
  • 5V CL9 timing matches factory specifications
  • Lifetime warranty from Computer Memory Solutions

HP 6000 Pro Desktop Memory

This 4 GB DDR3 module is built for HP Compaq Business Desktop 6000 Pro SFF and Microtower systems. It installs as a single 240-pin DIMM to add capacity to compatible workstations.

DDR3-1333 Bus Limit

The system memory bus runs at 1066 MHz even with 1333 MHz modules installed, so the higher-rated speed will not be reached. Maximum supported memory is 16 GB across four slots, and a 64-bit operating system is required to address the full amount.

Upgrade From Smaller Kits

Replacing 1 GB or 2 GB sticks with this 4 GB module increases total memory toward the 16 GB ceiling. The jump is worthwhile when the current configuration leaves less than 3.5 GB usable or when dual-channel pairs can be completed for balanced bandwidth.

Istaknuto

  • 4GB DDR3 1333MHz boosts HP 6000 Pro responsiveness
  • Non-ECC unbuffered 240-pin DIMM installs in seconds
  • Guaranteed compatibility with SFF and Microtower 6000 Pro
  • 5V CL9 timing matches factory specifications
  • Lifetime warranty from Computer Memory Solutions

Specifikacije

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Business Desktop 6000 Pro (Sff) (Microtower)
Package Content1 Memory RAM Stick

Pitanja o ovom artiklu

Should I buy a single 4 GB module or fill all four slots for the 16 GB maximum?

The HP 6000 Pro has four DIMM sockets and supports up to 16 GB total; you can add modules one at a time, but they must be installed in matched pairs to enable dual-channel operation.

The module is rated at 1333 MHz — will it actually run at that speed in the 6000 Pro?

HP documentation states the memory bus runs at 1066 MHz, so a 1333 MHz DIMM will operate at the lower 1066 MHz bus speed once installed.

Does the 240-pin DDR3 DIMM fit the 6000 Pro SFF and Microtower without issues?

Yes — the module is a 240-pin DDR3 SDRAM DIMM specified for both the HP 6000 Pro SFF and Microtower form factors.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.