Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Computer Memory Solutions

Computer Memory Solutions CM5126410600DIMM 4GB DDR3 1333MHz for HP 6000 Pro SFF Microtower memory upgrade

SKU CH-CER3-3Z95D

4GB DDR3 1333MHz DIMM module for HP 6000 Pro SFF and Microtower desktops

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4GB DDR3 1333MHz boosts HP 6000 Pro responsiveness
  • Non-ECC unbuffered 240-pin DIMM installs in seconds
  • Guaranteed compatibility with SFF and Microtower 6000 Pro
  • 5V CL9 timing matches factory specifications
  • Lifetime warranty from Computer Memory Solutions

HP 6000 Pro Desktop Memory

This 4 GB DDR3 module is built for HP Compaq Business Desktop 6000 Pro SFF and Microtower systems. It installs as a single 240-pin DIMM to add capacity to compatible workstations.

DDR3-1333 Bus Limit

The system memory bus runs at 1066 MHz even with 1333 MHz modules installed, so the higher-rated speed will not be reached. Maximum supported memory is 16 GB across four slots, and a 64-bit operating system is required to address the full amount.

Upgrade From Smaller Kits

Replacing 1 GB or 2 GB sticks with this 4 GB module increases total memory toward the 16 GB ceiling. The jump is worthwhile when the current configuration leaves less than 3.5 GB usable or when dual-channel pairs can be completed for balanced bandwidth.

Pluspunten

  • 4GB DDR3 1333MHz boosts HP 6000 Pro responsiveness
  • Non-ECC unbuffered 240-pin DIMM installs in seconds
  • Guaranteed compatibility with SFF and Microtower 6000 Pro
  • 5V CL9 timing matches factory specifications
  • Lifetime warranty from Computer Memory Solutions

Specificaties

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Business Desktop 6000 Pro (Sff) (Microtower)
Package Content1 Memory RAM Stick

Vragen over dit artikel

Should I buy a single 4 GB module or fill all four slots for the 16 GB maximum?

The HP 6000 Pro has four DIMM sockets and supports up to 16 GB total; you can add modules one at a time, but they must be installed in matched pairs to enable dual-channel operation.

The module is rated at 1333 MHz — will it actually run at that speed in the 6000 Pro?

HP documentation states the memory bus runs at 1066 MHz, so a 1333 MHz DIMM will operate at the lower 1066 MHz bus speed once installed.

Does the 240-pin DDR3 DIMM fit the 6000 Pro SFF and Microtower without issues?

Yes — the module is a 240-pin DDR3 SDRAM DIMM specified for both the HP 6000 Pro SFF and Microtower form factors.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.