Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Silver 2.5 inch Dell SAS hard drive with label

DELL

DELL AL14SEB18EQ 1.8TB 10K SAS 12G 2.5in internal hard drive

SKU CH-3KK1-BERCJ

A 1.8 TB, 10,000 RPM internal 2.5-inch SAS 12 Gbps hard drive for enterprise storage

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

1.8 TB 10K SAS Enterprise Drive

This 2.5 inch internal hard drive delivers 1.8 TB of storage on a 12 Gbps SAS interface. It spins at 10000 RPM for high-throughput enterprise workloads. The drive is supplied new as an original Dell part numbered AL14SEB18EQ.

Server Builders Needing 12 Gbps SAS

The drive suits servers and arrays that require a 2.5 inch SAS 12 Gbps connection and 10K rotational speed. It is not for systems limited to slower SAS speeds or larger 3.5 inch drive bays. Buyers needing a different capacity or interface should look elsewhere.

12 Gbps SAS Interface Decides Fit

The single specification that determines compatibility is the 12 Gbps SAS interface on a 2.5 inch form factor. The host controller and backplane must support this exact interface and physical size. Verify the system accepts 12 Gbps SAS before purchase.

Istaknuto

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Pitanja o ovom artiklu

Does the 2.5in SAS drive fit a standard SFF bay and backplane?

The drive uses a 2.5in SFF form factor with a SAS 12Gbps connector, matching standard small-form-factor hot-plug bays and backplanes.

What is the correct way to seat the drive so the SAS connector fully engages?

Slide the carrier into the bay until the latch clicks, then press the drive firmly forward until the SAS 12Gbps connector seats completely; the common error is stopping at the first click.

When should the 1.8TB 10000RPM drive be replaced in a RAID array?

Replace the drive when SMART reports reallocated sectors, predictive-failure alerts, or after the manufacturer-rated workload limit for 10000RPM SAS drives is reached.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.