Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2.5 inch Dell SAS hard drive with label

DELL

DELL AL14SEB18EQ 1.8TB 10K SAS 12G 2.5in internal hard drive

SKU CH-3KK1-BERCJ

A 1.8 TB, 10,000 RPM internal 2.5-inch SAS 12 Gbps hard drive for enterprise storage

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

1.8 TB 10K SAS Enterprise Drive

This 2.5 inch internal hard drive delivers 1.8 TB of storage on a 12 Gbps SAS interface. It spins at 10000 RPM for high-throughput enterprise workloads. The drive is supplied new as an original Dell part numbered AL14SEB18EQ.

Server Builders Needing 12 Gbps SAS

The drive suits servers and arrays that require a 2.5 inch SAS 12 Gbps connection and 10K rotational speed. It is not for systems limited to slower SAS speeds or larger 3.5 inch drive bays. Buyers needing a different capacity or interface should look elsewhere.

12 Gbps SAS Interface Decides Fit

The single specification that determines compatibility is the 12 Gbps SAS interface on a 2.5 inch form factor. The host controller and backplane must support this exact interface and physical size. Verify the system accepts 12 Gbps SAS before purchase.

Helstu kostir

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Does the 2.5in SAS drive fit a standard SFF bay and backplane?

The drive uses a 2.5in SFF form factor with a SAS 12Gbps connector, matching standard small-form-factor hot-plug bays and backplanes.

What is the correct way to seat the drive so the SAS connector fully engages?

Slide the carrier into the bay until the latch clicks, then press the drive firmly forward until the SAS 12Gbps connector seats completely; the common error is stopping at the first click.

When should the 1.8TB 10000RPM drive be replaced in a RAID array?

Replace the drive when SMART reports reallocated sectors, predictive-failure alerts, or after the manufacturer-rated workload limit for 10000RPM SAS drives is reached.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.