Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 2.5 inch Dell SAS hard drive with label

DELL

DELL AL14SEB18EQ 1.8TB 10K SAS 12G 2.5in internal hard drive

SKU CH-3KK1-BERCJ

A 1.8 TB, 10,000 RPM internal 2.5-inch SAS 12 Gbps hard drive for enterprise storage

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

1.8 TB 10K SAS Enterprise Drive

This 2.5 inch internal hard drive delivers 1.8 TB of storage on a 12 Gbps SAS interface. It spins at 10000 RPM for high-throughput enterprise workloads. The drive is supplied new as an original Dell part numbered AL14SEB18EQ.

Server Builders Needing 12 Gbps SAS

The drive suits servers and arrays that require a 2.5 inch SAS 12 Gbps connection and 10K rotational speed. It is not for systems limited to slower SAS speeds or larger 3.5 inch drive bays. Buyers needing a different capacity or interface should look elsewhere.

12 Gbps SAS Interface Decides Fit

The single specification that determines compatibility is the 12 Gbps SAS interface on a 2.5 inch form factor. The host controller and backplane must support this exact interface and physical size. Verify the system accepts 12 Gbps SAS before purchase.

Pluspunten

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Does the 2.5in SAS drive fit a standard SFF bay and backplane?

The drive uses a 2.5in SFF form factor with a SAS 12Gbps connector, matching standard small-form-factor hot-plug bays and backplanes.

What is the correct way to seat the drive so the SAS connector fully engages?

Slide the carrier into the bay until the latch clicks, then press the drive firmly forward until the SAS 12Gbps connector seats completely; the common error is stopping at the first click.

When should the 1.8TB 10000RPM drive be replaced in a RAID array?

Replace the drive when SMART reports reallocated sectors, predictive-failure alerts, or after the manufacturer-rated workload limit for 10000RPM SAS drives is reached.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.