暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch Dell SAS hard drive with label

DELL

DELL AL14SEB18EQ 1.8TB 10K SAS 12G 2.5in internal hard drive

SKU CH-3KK1-BERCJ

A 1.8 TB, 10,000 RPM internal 2.5-inch SAS 12 Gbps hard drive for enterprise storage

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

1.8 TB 10K SAS Enterprise Drive

This 2.5 inch internal hard drive delivers 1.8 TB of storage on a 12 Gbps SAS interface. It spins at 10000 RPM for high-throughput enterprise workloads. The drive is supplied new as an original Dell part numbered AL14SEB18EQ.

Server Builders Needing 12 Gbps SAS

The drive suits servers and arrays that require a 2.5 inch SAS 12 Gbps connection and 10K rotational speed. It is not for systems limited to slower SAS speeds or larger 3.5 inch drive bays. Buyers needing a different capacity or interface should look elsewhere.

12 Gbps SAS Interface Decides Fit

The single specification that determines compatibility is the 12 Gbps SAS interface on a 2.5 inch form factor. The host controller and backplane must support this exact interface and physical size. Verify the system accepts 12 Gbps SAS before purchase.

特長

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 12Gbps interface enables high-throughput transfers
  • 5in small form factor fits dense server bays
  • New condition ensures full manufacturer specification performance

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the 2.5in SAS drive fit a standard SFF bay and backplane?

The drive uses a 2.5in SFF form factor with a SAS 12Gbps connector, matching standard small-form-factor hot-plug bays and backplanes.

What is the correct way to seat the drive so the SAS connector fully engages?

Slide the carrier into the bay until the latch clicks, then press the drive firmly forward until the SAS 12Gbps connector seats completely; the common error is stopping at the first click.

When should the 1.8TB 10000RPM drive be replaced in a RAID array?

Replace the drive when SMART reports reallocated sectors, predictive-failure alerts, or after the manufacturer-rated workload limit for 10000RPM SAS drives is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。