Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Aqua duplex fibre cable with LC and FC connectors, 25m length

Enfain

Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 25m

SKU CH-1BS0-CQC90

A 25-metre OM3 duplex multimode patch cord with LC and FC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss

Length 25m

  • Supports 10/40G speeds with OM3 850nm core
  • Low 0.2dB typical insertion loss preserves signal quality
  • High >38dB return loss minimises back-reflection
  • Durable 3.0mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20°C to +60°C

Enfain OM3 Duplex Patch Cable

This 25 metre OM3 multimode cable carries 10 gigabit signals over an 850 nm wavelength. It uses a duplex LC to FC connector pair with a 3.0 mm PVC jacket and ceramic ferrules. Typical insertion loss is .2 dB and maximum insertion loss is .3 dB while return loss exceeds 38 dB.

Suited for short reach data centre links

The cable suits server, switch and storage connections inside a rack or between adjacent racks. It supports 1G, 10G and 40G multimode standards. Builders who need single mode reach, longer distances or a different connector combination should choose another cable.

Fits standard LC and FC transceiver ports

The 330 mm minimum bending radius allows tidy routing in dense patch panels. Ceramic ferrules withstand 1000 mating cycles and the assembly operates from -20 °C to +60 °C. The aqua jacket identifies OM3 grade fibre at a glance.

Istaknuto

  • Supports 10/40G speeds with OM3 850nm core
  • Low 0.2dB typical insertion loss preserves signal quality
  • High >38dB return loss minimises back-reflection
  • Durable 3.0mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20°C to +60°C

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What connectors must my switch and server already have to use this LC-FC duplex cable?

One end needs an LC port and the other an FC port; both must support multimode fibre at 850 nm.

Will this OM3 patch cord still reach 10 Gbps if I keep my older 1 Gbps transceivers?

Yes, the cable is rated for 1 G, 10 G and 40 G operation, so legacy 1 G transceivers will work.

How can I verify the link is healthy after I plug it in?

Measure insertion loss with a light source and power meter; typical loss should be around .2 dB and not exceed .3 dB, while return loss should be better than 38 dB.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.