暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Enfain

Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 25m

SKU CH-1BS0-CQC90

A 25-metre OM3 duplex multimode patch cord with LC and FC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss

Length 25m

  • Supports 10/40G speeds with OM3 850nm core
  • Low 0.2dB typical insertion loss preserves signal quality
  • High >38dB return loss minimises back-reflection
  • Durable 3.0mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20°C to +60°C

Enfain OM3 Duplex Patch Cable

This 25 metre OM3 multimode cable carries 10 gigabit signals over an 850 nm wavelength. It uses a duplex LC to FC connector pair with a 3.0 mm PVC jacket and ceramic ferrules. Typical insertion loss is .2 dB and maximum insertion loss is .3 dB while return loss exceeds 38 dB.

Suited for short reach data centre links

The cable suits server, switch and storage connections inside a rack or between adjacent racks. It supports 1G, 10G and 40G multimode standards. Builders who need single mode reach, longer distances or a different connector combination should choose another cable.

Fits standard LC and FC transceiver ports

The 330 mm minimum bending radius allows tidy routing in dense patch panels. Ceramic ferrules withstand 1000 mating cycles and the assembly operates from -20 °C to +60 °C. The aqua jacket identifies OM3 grade fibre at a glance.

特長

  • Supports 10/40G speeds with OM3 850nm core
  • Low 0.2dB typical insertion loss preserves signal quality
  • High >38dB return loss minimises back-reflection
  • Durable 3.0mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20°C to +60°C

仕様

この商品の仕様はまだ公開されていません。

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What connectors must my switch and server already have to use this LC-FC duplex cable?

One end needs an LC port and the other an FC port; both must support multimode fibre at 850 nm.

Will this OM3 patch cord still reach 10 Gbps if I keep my older 1 Gbps transceivers?

Yes, the cable is rated for 1 G, 10 G and 40 G operation, so legacy 1 G transceivers will work.

How can I verify the link is healthy after I plug it in?

Measure insertion loss with a light source and power meter; typical loss should be around .2 dB and not exceed .3 dB, while return loss should be better than 38 dB.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。