Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Aqua duplex fibre cable with LC and FC connectors, 25m length

Enfain

Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 25m

SKU CH-1BS0-CQC90

A 25-metre OM3 duplex multimode patch cord with LC and FC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss

Length 25m

  • Supports 10/40G speeds with OM3 850nm core
  • Low 0.2dB typical insertion loss preserves signal quality
  • High >38dB return loss minimises back-reflection
  • Durable 3.0mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20°C to +60°C

Enfain OM3 Duplex Patch Cable

This 25 metre OM3 multimode cable carries 10 gigabit signals over an 850 nm wavelength. It uses a duplex LC to FC connector pair with a 3.0 mm PVC jacket and ceramic ferrules. Typical insertion loss is .2 dB and maximum insertion loss is .3 dB while return loss exceeds 38 dB.

Suited for short reach data centre links

The cable suits server, switch and storage connections inside a rack or between adjacent racks. It supports 1G, 10G and 40G multimode standards. Builders who need single mode reach, longer distances or a different connector combination should choose another cable.

Fits standard LC and FC transceiver ports

The 330 mm minimum bending radius allows tidy routing in dense patch panels. Ceramic ferrules withstand 1000 mating cycles and the assembly operates from -20 °C to +60 °C. The aqua jacket identifies OM3 grade fibre at a glance.

Fordele

  • Supports 10/40G speeds with OM3 850nm core
  • Low 0.2dB typical insertion loss preserves signal quality
  • High >38dB return loss minimises back-reflection
  • Durable 3.0mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20°C to +60°C

Specifikationer

Der er endnu ikke offentliggjort specifikationer for denne vare.

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What connectors must my switch and server already have to use this LC-FC duplex cable?

One end needs an LC port and the other an FC port; both must support multimode fibre at 850 nm.

Will this OM3 patch cord still reach 10 Gbps if I keep my older 1 Gbps transceivers?

Yes, the cable is rated for 1 G, 10 G and 40 G operation, so legacy 1 G transceivers will work.

How can I verify the link is healthy after I plug it in?

Measure insertion loss with a light source and power meter; typical loss should be around .2 dB and not exceed .3 dB, while return loss should be better than 38 dB.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.