GUDGA GS 128GB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
GUDGA
A 2.5-inch SATA solid-state drive with 256GB capacity delivering up to 550MB/s reads and 500MB/s writes for faster boot and file transfers
Style 2.5"
The GUDGA GS-256 is a 2.5 inch SATA III internal solid-state drive built with 3D TLC NAND flash. It targets users upgrading a laptop or desktop that only accepts the 2.5 inch form factor and a SATA connection. The 256GB capacity provides space for the operating system and core applications.
The drive operates between 0°C and 70°C and can be stored from -20°C to 75°C. It runs on 5V power with no moving parts, so it produces no audible noise during operation. Sequential reads reach 550MB/s and writes reach 500MB/s while drawing minimal power. Endurance is rated at 150TB written and 1,000,000 hours MTBF.
Replacing a 2.5 inch hard drive with this SSD cuts boot time and application load time dramatically. The 7mm height fits most laptop bays and desktop trays without adapters. The jump is worth it when the system feels sluggish on a spinning disk and the motherboard lacks an M.2 slot for newer protocols.
| Brand | GUDGA |
|---|---|
| Series | GS-Series |
| Model | GS-256 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | 550MB/s |
| Max Sequential Write | 500MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 150TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
| Manufacturer Recertified | Yes |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Mount the 7 mm drive in the 2.5 inch bay, connect the SATA data and power cables, then initialise and format the 256 GB volume in the operating system — the formatting step is the one people forget.
The 3D TLC NAND is rated for 150 TBW and 1,000,000 hours MTBF; no scheduled maintenance is required, but the drive should be replaced once the 150 TBW endurance limit is reached.
Sequential write speed peaks at 500 MB/s and the 150 TBW endurance budget is the first hard limit reached under continuous heavy write workloads.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?