GUDGA GS 128GB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
GUDGA
A 2.5-inch SATA solid-state drive with 256GB capacity delivering up to 550MB/s reads and 500MB/s writes for faster boot and file transfers
Style 2.5"
The GUDGA GS-256 is a 2.5 inch SATA III internal solid-state drive built with 3D TLC NAND flash. It targets users upgrading a laptop or desktop that only accepts the 2.5 inch form factor and a SATA connection. The 256GB capacity provides space for the operating system and core applications.
The drive operates between 0°C and 70°C and can be stored from -20°C to 75°C. It runs on 5V power with no moving parts, so it produces no audible noise during operation. Sequential reads reach 550MB/s and writes reach 500MB/s while drawing minimal power. Endurance is rated at 150TB written and 1,000,000 hours MTBF.
Replacing a 2.5 inch hard drive with this SSD cuts boot time and application load time dramatically. The 7mm height fits most laptop bays and desktop trays without adapters. The jump is worth it when the system feels sluggish on a spinning disk and the motherboard lacks an M.2 slot for newer protocols.
| Brand | GUDGA |
|---|---|
| Series | GS-Series |
| Model | GS-256 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | 550MB/s |
| Max Sequential Write | 500MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 150TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
| Manufacturer Recertified | Yes |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Mount the 7 mm drive in the 2.5 inch bay, connect the SATA data and power cables, then initialise and format the 256 GB volume in the operating system — the formatting step is the one people forget.
The 3D TLC NAND is rated for 150 TBW and 1,000,000 hours MTBF; no scheduled maintenance is required, but the drive should be replaced once the 150 TBW endurance limit is reached.
Sequential write speed peaks at 500 MB/s and the 150 TBW endurance budget is the first hard limit reached under continuous heavy write workloads.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?