GUDGA GS 128GB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.
GUDGA
A 2.5-inch SATA solid-state drive with 256GB capacity delivering up to 550MB/s reads and 500MB/s writes for faster boot and file transfers
Style 2.5"
The GUDGA GS-256 is a 2.5 inch SATA III internal solid-state drive built with 3D TLC NAND flash. It targets users upgrading a laptop or desktop that only accepts the 2.5 inch form factor and a SATA connection. The 256GB capacity provides space for the operating system and core applications.
The drive operates between 0°C and 70°C and can be stored from -20°C to 75°C. It runs on 5V power with no moving parts, so it produces no audible noise during operation. Sequential reads reach 550MB/s and writes reach 500MB/s while drawing minimal power. Endurance is rated at 150TB written and 1,000,000 hours MTBF.
Replacing a 2.5 inch hard drive with this SSD cuts boot time and application load time dramatically. The 7mm height fits most laptop bays and desktop trays without adapters. The jump is worth it when the system feels sluggish on a spinning disk and the motherboard lacks an M.2 slot for newer protocols.
| Brand | GUDGA |
|---|---|
| Series | GS-Series |
| Model | GS-256 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | 550MB/s |
| Max Sequential Write | 500MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 150TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
| Manufacturer Recertified | Yes |
Outras versões deste modelo
Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.
Mount the 7 mm drive in the 2.5 inch bay, connect the SATA data and power cables, then initialise and format the 256 GB volume in the operating system — the formatting step is the one people forget.
The 3D TLC NAND is rated for 150 TBW and 1,000,000 hours MTBF; no scheduled maintenance is required, but the drive should be replaced once the 150 TBW endurance limit is reached.
Sequential write speed peaks at 500 MB/s and the 150 TBW endurance budget is the first hard limit reached under continuous heavy write workloads.
Também nesta secção
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
O que paga, e a moeda em que vê os preços.
Enviado da sua carteira ao finalizar a compra
Apenas informativo — o catálogo está em dólares
Nenhuma moeda corresponde.
Escolha o idioma em que o site lhe fala.
Ainda não tem conta?
Já tem conta?
Não existe reposição automática: esta loja não envia qualquer e-mail, pelo que não há nenhum link de utilização única para pedir. Deixe o endereço na conta e ele será tratado manualmente.
Pedido registado
Não vai chegar nada à sua caixa de entrada — esta loja não envia qualquer e-mail. Alguém trata disto manualmente.
Recordou-se dela?