GUDGA GS 128GB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
GUDGA
A 2.5-inch SATA solid-state drive with 256GB capacity delivering up to 550MB/s reads and 500MB/s writes for faster boot and file transfers
Style 2.5"
The GUDGA GS-256 is a 2.5 inch SATA III internal solid-state drive built with 3D TLC NAND flash. It targets users upgrading a laptop or desktop that only accepts the 2.5 inch form factor and a SATA connection. The 256GB capacity provides space for the operating system and core applications.
The drive operates between 0°C and 70°C and can be stored from -20°C to 75°C. It runs on 5V power with no moving parts, so it produces no audible noise during operation. Sequential reads reach 550MB/s and writes reach 500MB/s while drawing minimal power. Endurance is rated at 150TB written and 1,000,000 hours MTBF.
Replacing a 2.5 inch hard drive with this SSD cuts boot time and application load time dramatically. The 7mm height fits most laptop bays and desktop trays without adapters. The jump is worth it when the system feels sluggish on a spinning disk and the motherboard lacks an M.2 slot for newer protocols.
| Brand | GUDGA |
|---|---|
| Series | GS-Series |
| Model | GS-256 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | 550MB/s |
| Max Sequential Write | 500MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 150TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
| Manufacturer Recertified | Yes |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Mount the 7 mm drive in the 2.5 inch bay, connect the SATA data and power cables, then initialise and format the 256 GB volume in the operating system — the formatting step is the one people forget.
The 3D TLC NAND is rated for 150 TBW and 1,000,000 hours MTBF; no scheduled maintenance is required, but the drive should be replaced once the 150 TBW endurance limit is reached.
Sequential write speed peaks at 500 MB/s and the 150 TBW endurance budget is the first hard limit reached under continuous heavy write workloads.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?