KingSpec P3-512-FB 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
KingSpec
A 2.5" SATA III solid-state drive with 1TB capacity, sequential reads up to 560 MB/s, writes up to 530 MB/s, and 480 TBW endurance
Options P3-1TB
The KingSpec P3-1TB is a 2.5 inch internal solid state drive with a 1TB capacity and a SATA III interface. It uses 3D NAND flash memory and delivers sequential read speeds up to 560 MBps and write speeds up to 530 MBps. Random performance reaches 65000 IOPS read and 70000 IOPS write.
Verify that your system has a free 2.5 inch drive bay and a SATA data cable connected to a SATA III port for full speed. Confirm the power supply provides a SATA power connector for the drive's 0.41W idle draw. Ensure the operating system supports TRIM and NCQ to maintain performance and endurance.
This drive suits users upgrading a laptop or desktop that relies on the SATA interface and needs 1TB of reliable storage with 480TB TBW endurance. It is not suited for builds requiring an M.2 form factor or PCIe based throughput.
| Brand | KingSpec |
|---|---|
| Series | P3 Series |
| Model | P3-1TB |
| Part Number | P3-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 65,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.41W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The drive is supplied as a bare 2.5" SATA III unit; mounting brackets and data cables are not included and must be sourced separately.
The P3 series is offered in capacities up to 8TB, so the 1TB model is the entry point and larger drives can be chosen if more space is needed.
On a SATA III connection the drive can reach 560 MB/s read and 530 MB/s write, cutting boot and application load times to roughly one quarter of a traditional hard drive.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?