KingSpec P3-512-FB 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
KingSpec
A 2.5" SATA III solid-state drive with 1TB capacity, sequential reads up to 560 MB/s, writes up to 530 MB/s, and 480 TBW endurance
Options P3-1TB
The KingSpec P3-1TB is a 2.5 inch internal solid state drive with a 1TB capacity and a SATA III interface. It uses 3D NAND flash memory and delivers sequential read speeds up to 560 MBps and write speeds up to 530 MBps. Random performance reaches 65000 IOPS read and 70000 IOPS write.
Verify that your system has a free 2.5 inch drive bay and a SATA data cable connected to a SATA III port for full speed. Confirm the power supply provides a SATA power connector for the drive's 0.41W idle draw. Ensure the operating system supports TRIM and NCQ to maintain performance and endurance.
This drive suits users upgrading a laptop or desktop that relies on the SATA interface and needs 1TB of reliable storage with 480TB TBW endurance. It is not suited for builds requiring an M.2 form factor or PCIe based throughput.
| Brand | KingSpec |
|---|---|
| Series | P3 Series |
| Model | P3-1TB |
| Part Number | P3-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 65,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.41W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The drive is supplied as a bare 2.5" SATA III unit; mounting brackets and data cables are not included and must be sourced separately.
The P3 series is offered in capacities up to 8TB, so the 1TB model is the entry point and larger drives can be chosen if more space is needed.
On a SATA III connection the drive can reach 560 MB/s read and 530 MB/s write, cutting boot and application load times to roughly one quarter of a traditional hard drive.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?