KingSpec P3-512-FB 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
KingSpec
A 2.5" SATA III solid-state drive with 1TB capacity, sequential reads up to 560 MB/s, writes up to 530 MB/s, and 480 TBW endurance
Options P3-1TB
The KingSpec P3-1TB is a 2.5 inch internal solid state drive with a 1TB capacity and a SATA III interface. It uses 3D NAND flash memory and delivers sequential read speeds up to 560 MBps and write speeds up to 530 MBps. Random performance reaches 65000 IOPS read and 70000 IOPS write.
Verify that your system has a free 2.5 inch drive bay and a SATA data cable connected to a SATA III port for full speed. Confirm the power supply provides a SATA power connector for the drive's 0.41W idle draw. Ensure the operating system supports TRIM and NCQ to maintain performance and endurance.
This drive suits users upgrading a laptop or desktop that relies on the SATA interface and needs 1TB of reliable storage with 480TB TBW endurance. It is not suited for builds requiring an M.2 form factor or PCIe based throughput.
| Brand | KingSpec |
|---|---|
| Series | P3 Series |
| Model | P3-1TB |
| Part Number | P3-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 65,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.41W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
The drive is supplied as a bare 2.5" SATA III unit; mounting brackets and data cables are not included and must be sourced separately.
The P3 series is offered in capacities up to 8TB, so the 1TB model is the entry point and larger drives can be chosen if more space is needed.
On a SATA III connection the drive can reach 560 MB/s read and 530 MB/s write, cutting boot and application load times to roughly one quarter of a traditional hard drive.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?